Design, fabrication and inspection of textile concrete based on polymer / composite paste casting coating technology

Document Type : Research Paper

Authors

Imam Hosein Uni

10.22124/jcr.2023.20564.1514

Abstract

One of the main challenges of conventional concrete canvas is the separation of the geo-membrane layer from the fabric concrete substrate, which has caused major problems in the discussion of the application of this product. In this work, the method of casting polymer paste based on acrylic resins was used to create a single-layer coating of sealing resin with the high overall mechanical strength of the product, and the properties of the product were investigated. In this method, polymer paste is formed in one step without the use of adhesive and geo-membrane layer on the three-dimensional substrate bed, and the overall productivity of concrete canvas is formed. The results showed that concrete canvas produced based on polymer paste casting method with suitable mechanical strength (30 (kN / mm2)), better sealing (up to 30 days without changing weight against water), non-layering, Suitable chemical resistance against hexane, toluene, benzene and octane and better temperature resistance (from -20 to 100 C) than conventional concrete canvas product.

Keywords

Main Subjects

References

 ]1] Malnar, Leo, Bruno Matjašić, and Boris Kereš. "Concrete Canvas application." In 6th International Conference on Road and Rail Infrastructure. 2021.
]2] Kadam, Kaustubh A. "Development of Concrete Canvas for Structural Applications." In Advances in Civil Engineering and Infrastructural Development, pp. 637-644. Springer, Singapore, 2021.
]3] Ding, Guangya, Lin Zhou, Jun Wang, Ying Xu, Xueyu Geng, and Xiaobin Li. "Shaking table tests on gravel slopes reinforced by concrete canvas." Geotextiles and Geomembranes 48, no. 4 (2020): 539-545.
]4] Yangfeng, Zhou, Li Li, and Zhang Zhongfeng. "Research on the Design of Concrete Canvas Furniture." Furniture & Interior Design (2017): 05.
]5] Li, Hui, Huisu Chen, Xiangyu Li, and Fangyuan Zhang. "Design and construction application of concrete canvas for slope protection." Powder Technology 344 (2019): 937-946.
]6] Li, Hui, Huisu Chen, Lin Liu, Fangyuan Zhang, Fangyu Han, Tao Lv, Wulong Zhang, and Yujie Yang. "Application design of concrete canvas (CC) in soil reinforced structure." Geotextiles and Geomembranes 44, no. 4 (2016): 557-567.
]7] Jun, Zhang, Xu Wei, Weng Xingzhong, Gao Peiwei, Yao Zhihua, Su Lihai, and Wang Jiang. "Application and research status of concrete canvas and its application prospect in emergency engineering." Journal of Engineered Fibers and Fabrics 15 (2020): 1558925020975759.
]8] Zhou, Lin, Guangya Ding, Jie Tan, Xiaoxia Zhao, and Jun Wang. "Seismic response of concrete-canvas reinforced slopes: influence of tilt degrees for reinforcement." Journal of Earthquake and Tsunami 14, no. 03 (2020): 2050011.
]9] Niu, Jiangang, Wenming Xu, Jingjun Li, and Jian Liang. "Influence of Cross-Sectional Shape on the Mechanical Properties of Concrete Canvas and CFRP-Reinforced Columns." Advances in Materials Science and Engineering 2021 (2021).
]10] Han, Fangyu, Huisu Chen, Wulong Zhang, Tao Lv, and Yujie Yang. "Influence of 3D spacer fabric on drying shrinkage of concrete canvas." Journal of Industrial Textiles 45, no. 6 (2016): 1457-1476.
]11] Han, Fangyu, Huisu Chen, Xiangyu Li, Buchuan Bao, Tao Lv, Wulong Zhang, and Wen Hui Duan. "Improvement of mechanical properties of concrete canvas by anhydrite-modified calcium sulfoaluminate cement." Journal of Composite Materials 50, no. 14 (2016): 1937-1950.
]12] Pallavi K. Pasnur*, Ansari Umair Ahmad. "Experimental Study on Concrete Canvas." Journal of Advances and Scholarly Researches in Allied Education 15, no. 2 (2018): 648 - 652 (5).
]13] Zhang, Fangyuan, Huisu Chen, Xiangyu Li, Hui Li, Tao Lv, Wulong Zhang, and Yujie Yang. "Experimental study of the mechanical behavior of FRP-reinforced concrete canvas panels." Composite Structures 176 (2017): 608-616.
]14] Han, Fangyu, Huisu Chen, Kefeng Jiang, Wulong Zhang, Tao Lv, and Yujie Yang. "Influences of geometric patterns of 3D spacer fabric on tensile behavior of concrete canvas." Construction and Building Materials 65 (2014): 620-629.
]15] Bahukudumbi, Pradipkumar, Randolph S. Kohlman, Mark A. Hornung, Peter Brewin, and William Crawford. "Composite textile." U.S. Patent Application 14/048,630, filed April 9, 2015.
]16] Standard, A. S. "D638, Standard test method for tensile properties of plastics, ASTM International, West Conshohocken, PA,(2010)." Google Scholar There is no corresponding record for this reference (2013).
]17] STM D6768 / D6768M-20, Standard Test Method for Tensile Strength of Geosynthetic Clay Liners, ASTM International, West Conshohocken, PA, 2020
]18] EN, BS. "Fibre-cement flat sheets. Product specification and test methods." Br. Stand. Inst. (2012): 60.

Files

Share

How to cite

Statistics