@article { author = {مودی, فرامرز and رمضانیانپور, علی اکبر and باقری چنار, قاسم and Riahi dehkordi, Erfan}, title = {Evaluation of pozzolanic mortars containing micro silica against acid and chloride attack}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {5-15}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.6693.1170}, abstract = {Acidic environments lead to rapid destruction in the reinforcement concrete structures. Chloride ions also lead to rebar corrosion. The aim of this study is to represent an appropriate mortar which resists against each of the acidic and chloride attack. For this purpose, three types of cement with combination of pozzolans (micro silica and pumice/trass) were used as 10 mix designs. Experiments consisted of compressive strength, capillary absorption and water permeability as general tests, and tests which control the performance of specimens against acid attack (compressive strength reduction, weight loss) and chloride attack (surface electrical resistivity, rapid chloride migration test). Results showed that until the age of 240 days, combination of 5% micro silica and 8% trass in slag cement would be an appropriate mix design for mortar against both chloride and acid attack. Usage of 10% pumice as a substitution of trass in the mentioned mix design performed well too.}, keywords = {Durability of mortar,acid attack,chloride ions,pozzolan}, title_fa = {ارزیابی ملات‌های پوزولانی با پایه‌ی میکروسیلیس در برابر محیط‌های خورنده‌ی اسیدی و کلرایدی}, abstract_fa = {محیط های اسیدی خرابی سریعی را در سازه های بتنی ایجاد می کنند. یون های کلراید نیز موجب خوردگی آرماتور می شوند. هدف این تحقیق، ارائه ی ملاتی مقاوم در برابر هر یک از عوامل اسیدی و کلرایدی می باشد. بدین منظور از سه نوع سیمان به همراه ترکیباتی از پوزولان های میکروسیلیس و پومیس/تراس استفاده شد تا 10 طرح اختلاط ساخته شود. آزمایش های صورت گرفته شامل آزمایشات کلی (مقاومت فشاری، جذب آب مویینه و جذب آب حجمی)، آزمایشات تعیین عملکرد در محیط کلرایدی (مقاومت الکتریکی سطحی و مهاجرت تسریع یافته ی یون های کلرایدی) و آزمایشات کنترل عملکرد در محیط اسیدی (کاهش مقاومت فشاری و کاهش وزن) می باشد. نتایج بدست آمده تا سن 240 روزه حاکی از آن است که ترکیب 5% میکروسیلیس و 8% تراس در سیمان سرباره ای می تواند طرح اختلاط مناسبی برای ملات در برابر محیط های مهاجم اسیدی و کلرایدی باشد. افزایش مقاومت الکتریکی و کاهش ضریب مهاجرت یون های کلرایدی به ترتیب تا 4 و 5 برابر نمونه شاهد، گواهی بر این ادعاست. هم چنین استفاده از 10% پومیس بجای پوزولان تراس در طرح مذکور نیز عملکرد قابل قبولی ارائه می کند.}, keywords_fa = {دوام ملات,محیط اسیدی,یون‌های کلراید,پوزولان}, url = {https://jcr.guilan.ac.ir/article_3577.html}, eprint = {https://jcr.guilan.ac.ir/article_3577_fb73d24b8b40bea8ff1c94182d7225c2.pdf} } @article { author = {abdolahzade, shahriar and nili, mahmoud}, title = {The influence of compound layers on the mechanical properties and frost resistance of roller compacted concrete pavement}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {17-28}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.7811.1207}, abstract = {Abstract Nowadays, roller compacted concrete pavement, (RCCP), is becoming popular due to lower cost of construction, repair, and maintenance compared with those for normal concrete. However, due to the roughness of the RCCP surface, its use in highway roads is limited. In the present paper, the effects of two different compound layers on mechanical and frost resistance of RCCP were investigated. Slag and silica fume were used as a partial replacement for cement in the predetermined mixtures. Two compound layers of the hot mix asphalt (HMA) and air-entrained concrete (AEC) were used. The mixtures were suffered under freeze-thaw cycles in the present of de-icing salt. The compressive strength and the connection resistance between the compound layers and RCCP after freeze-thaw cycles were evaluated via slant shear and splitting tensile tests. The results indicated that the addition of slag reduced both compressive strength and salt scaling resistance. On the contrary, silica fume improved compressive strength and particularly salt scaling resistance of the specimens. The results also showed that the connection resistance of the specimens was reduced, due to freeze-thaw cycles in the presence of the de-icing agent, about 12% and 10% for HMA and AEC layers, respectively.}, keywords = {Roller compacted concrete pavement,compressive strength,freeze-thaw cycles,supplementary cementitious material,compound layer}, title_fa = {تأثیر لایه تقویتی بر خواص مکانیکی و دوامی روسازی‌های بتن غلتکی مرکب حاوی مواد مکمل سیمانی}, abstract_fa = {چکیده علیرغم کاهش هزینه اجرا، نگهداری و ترمیم بتن‌های غلتکی در رویه‌های راه استفاده از این نوع بتن به علت ایجاد آلودگی صوتی ناشی از زبری لایه سطحی آن در بزرگراه‌ها با محدودیت مواجه است . در تحقیق حاضر اضافه کردن لایه سطحی بر روی بتن غلتکی جهت استفاده در بزرگراه‌ها پیشنهاد شده است. آزمونه‌های بتن غلتکی با و بدون روکش تحت اثر سیکل‌های یخ زدن و آب شدن در مجاورت نمک‌های یخ‌زدا قرارگرفته‌اند. پس از اعمال سیکل‌ها آزمونه‌های بتنی و مرکب تحت آزمایش های‌ مقاومت فشاری، دوام، کشش غیرمستقیم و همچنین برش سطح مورب قرارگرفته‌اند. همچنین از سرباره و دوده سیلیسی به‌عنوان جایگزین بخشی از سیمان در تعدادی از آزمونه‌ها استفاده‌ شده است. نتایج حاکی از آن است که سرباره به‌تنهایی باعث افت دوام و مقاومت فشاری در همه سنین است؛ اما با افزودن دوده سیلیسی بهبود دوام و مقاومت فشاری حتی در سنین کوتاه‌مدت نیز حاصل می‌گردد. اعمال شرایط ذوب و انجماد در حضور نمک‌‌های یخ‌زدا، اتصال لایه‌ها را در آزمونه‌های مرکب بتن غلتکی- آسفالت حدود 12 درصد و بتن غلتکی- بتن هوادار را حدود 10 درصد کاهش داده است}, keywords_fa = {بتن غلتکی روسازی,مقاومت فشاری,سیکل‌های یخ زدن و آب شدن,مواد مکمل سیمانی,روسازی مرکب}, url = {https://jcr.guilan.ac.ir/article_3578.html}, eprint = {https://jcr.guilan.ac.ir/article_3578_4ac221bd06ef6944258f5a9975e81c93.pdf} } @article { author = {Hamzenejadi, Abuzar and sharbatdar, mohammad kazem and Kheyroddin, Ali}, title = {Experimental Investigation of Shear behaviour of RC deep beams by Replacing regular concrete with HPFRCC}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {29-43}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.11866.1320}, abstract = {Nowadays the use of special and efficient concrete in concrete structures is increasingly spreading due to its unique characteristics. To overcome the issues is to reinforce the concrete by fibers which lead to the formation of multiple micro-cracks that is the main characteristic for providing the tensile ductility of HPFRCC materials. The influence of this material on bending behavior has been studied by many researchers. Thus, its influence on the shear behavior of deep beams is evaluated in this article. For this purpose, the empirical response of five beams including the conventional HPFRCC reinforced deep beams, under concentrated load, in the middle of the span with the shear span to depth ratio of 0.75 is evaluated. Deep beams of the first group with various fiber percentages of 0, 1 and 2, and, deep beams of the second group with steel fibers of 0 and 2 percent were constructed. The specimens of the first group did not have the web shear reinforcement while specimens of the second group had. After testing the specimens, it was observed that as the percentage of steel fibers increases, the bearing capacity and ductility of the specimens increases as well. Increasing the fiber percentage and adding shear reinforcement increases the shear deformation coefficient. On the other hand, F2 specimens in the second group, which have a shear reinforcement, have a residual coefficient of 9% higher than the same one in the first group (without shear reinforcement).}, keywords = {"deep beam","Fiber concrete","steel fibers","HPFRCC"}, title_fa = {بررسی آزمایشگاهی رفتار برشی تیرهای عمیق با جایگزینی بتن مسلح کامپوزیتی الیافی بجای بتن معمولی}, abstract_fa = {استفاده از بتن‌های ویژه و توانمند در سازه‌های بتنی به علت دارا بودن خصوصیات منحصر به ‌فرد، رو به گسترش می‏باشد. یکی از روش‌های غلبه بر این مشکل مسلح کردن بتن به الیاف می‌باشد که سبب تشکیل ترک‏های ریز چندگانه می‏گردد که مشخصه اصلی تامین شکل‏پذیری کششی مصالح HPFRCC است. با توجه به بررسی عمده استفاده از این مصالح بر روی رفتار خمشی و توجه کمتر به رفتار برشی، در این تحقیق اقدام به بررسی رفتار برشی این مصالح در تیرهای عمیق شده است. در این راستا پاسخ تجربی تعداد 5 تیر شامل تیرهای ساده عمیق مسلح بتن کامپوزیتی الیافی تحت بار متمرکز در وسط دهانه با نسبت دهانه برشی به عمق 75/0 مورد بررسی قرار گرفته است. تیرهای عمیق گروه اول با درصد متفاوت الیاف 0، 1 و 2 درصد و تیرهای گروه دوم با الیاف فولادی 0 و 2 درصد ساخته شدند. نمونه‏های گروه اول فاقد آرماتور برشی جان و نمونه‏های گروه دوم دارای آرماتور برشی جان می‏باشند. پس از انجام آزمایشات، ملاحظه گردید که با افزایش درصد الیاف فولادی در تیرهای عمیق، ظرفیت باربری و همچنین شکل‌پذیری نمونه‏ها به میزان قابل توجهی افزایش یافت. افزایش درصد الیاف و همچنین اضافه نمودن آرماتور‌های برشی، میزان ضریب شکل‌پذیری برشی را افزایش می‌دهد. از طرفی ملاحظه گردید، نمونه‌های F2 در گروه دوم که دارای آرماتور برشی جان می‌باشند، نسبت به نمونه مشابه در گروه اول (فاقد آرماتور برش جان)، دارای ضریب شکل‌پذیری حدود 9درصد بیشتر می‌باشند.}, keywords_fa = {"تیرعمیق","بتن الیافی","الیاف فولادی","HPFRCC"}, url = {https://jcr.guilan.ac.ir/article_3581.html}, eprint = {https://jcr.guilan.ac.ir/article_3581_917fb3f6b8e7b58333ce9e0b77e353e4.pdf} } @article { author = {Chaboki, Hamidreza and Ghalehnovi, Mansour and Karimipour, Arash}, title = {Study of the Flexural behaviour of recycled aggregate concrete beams}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {45-60}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.11162.1312}, abstract = {In this research, the effect of recycled aggregates obtained from the demolition of the old building on the preparation of concrete mixtures has been studied. The purpose of this study was to determine flexural behavior, flexural strength in reinforced concrete beams made of recycled aggregate. In the production of samples, recycled aggregates are used with 0%, 50% and 100% natural aggregates, respectively. The samples were tested for static quadrilateral bending and tested after 28 days of experiment. Therefore, by examining the results of laboratory studies, the flexural behavior of RC beams with the expansion of the recycling has been investigated. In addition, the results are compared with the relationships provided by ACI318, CSA and EuroCode2. The results obtained from this review show that by adding the ratio to the recycled aggregate substitute, the amount of net bending size at the criterial level increases and, with the expansion of the crack extending to the place of loading, the load is released flexibly. In addition, the use of 100% recycled aggregate increases the shape and flexural strength of RC concrete beams.}, keywords = {Flexural behaviour,reinforced concrete beams,recycled aggregate,cracking}, title_fa = {بررسی رفتار خمشی تیرهای بتنی ساخته شده از سنگدانه بازیافتی}, abstract_fa = {در این بررسی اثر افزودن سنگدانه‌ی بدست آمده از تخریب ساختمان قدیمی در تهیه مخلوط بتن مطالعه شده است. هدف از انجام این بررسی تعیین رفتار خمشی، ظرفیت خمشی در تیرهای بتن مسلح ساخته شده از سنگدانه بازیافتی است. در ساخت نمونه های مورد نظر از سنگدانه بازیافتی به ترتیب با مقدار 0درصد، 50 درصد و 100 درصد جایگزین سنگدانه طبیعی استفاده شده است. نمونه ها تحت انجام آزمایش خمش چهارنقطه ای استاتیکی بررسی شدند و بعد از 28 روز عمل آوری آزمایش شدند. از این رو، با بررسی نتایج بدست آمده از مطالعات آزمایشگاهی به بررسی رفتار خمشی تیرهای بتن مسلح دارای سنگدانه بازیافتی پرداخته شده است. افزون بر این نتایج بدست آمده با روابط ارائه شده توسط آیین نامه ACI318، CSA و EuroCode2 مورد مقایسه قرار گرفته است. نتایج بدست آمده از این بررسی نشان می‌دهد. با افزودن نسبت جایگزین سنگدانه بازیافتی مقدار عرض ترک خوردگی خمشی در وسط دهانه افزایش یافته و با گسترش امتداد ترک تا محل اعمال بار تیر بصورت خمشی گسیخته می‌شود. افزون بر این استفاده از 100 درصد سنگدانه بازیافتی سبب افزایش تغییر شکل و ظرفیت خمشی تیرهای بتن مسلح می شود.}, keywords_fa = {ظرفیت خمشی,تیرهای بتن مسلح,سنگدانه بازیافتی,ترک خوردگی}, url = {https://jcr.guilan.ac.ir/article_3579.html}, eprint = {https://jcr.guilan.ac.ir/article_3579_6145b1fe1cede3b91e1588273c354d7f.pdf} } @article { author = {Esmaili, J. and Aslani, Hossein}, title = {A Study on the Mechanical Properties of Concrete Containing Copper Mine Tailing}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {61-71}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.10567.1301}, abstract = {Copper Mine Tailing (CMT) is a solid-state waste material created through the purification process of copper. Separation of these materials is conducted during the purification Process of copper from copper ores. Since CMT material is an environmental pollutant. The mining enterprises have already been costs a lot for maintenance of these materials. Thus, the disposal of CMT material is a controversial environmental issue which necessitates the reuse/recycle of these materials. Numerous studies have been implemented around the world to dispose these waste materials as partial or complete substitution of fine aggregates or cement in mortars and concrete. This study is aimed at investigating the use of CMT materials as a partial replacement of Ordinary Portland Cement (OPC) in concrete. Specimens were prepared with 0%-30% of CMT material replacement of cement in concrete mixtures. Tests were conducted to determine the mechanical properties of concrete. In addition, the microstructure of cement paste including CMT-materials was investigated using Scanning Electron Microscopy tests. Results revealed that CMT material could be utilized up to 15% as partial replacement of cement. It was observed that CMT concrete (up to 15% substitution) had got improved mechanical properties in comparison to those of OPC concrete at different ages. It is an SiO2-rich material used as the potential source material for all construction projects. The statistical analysis illustrated that properties of CMT concrete were significant at 5% confidence level. Further, the environmental impact was computed and results shown that CMT concrete is more sustainable than control concrete and eco-friendly.}, keywords = {Copper mine tailing,Mechanical properties,Statistical analysis,Environmental impact}, title_fa = {مطالعه ویژگی‌های‌ مکانیکی بتن حاوی مواد باطله معدن مس}, abstract_fa = {مس یکی از پرمصرف‌ترین عناصر فلزی است که از دیرباز در صنایع مختلف استفاده می‌شود. در فرآیند جداسازی محصولات ارزشمند مس از سنگ معدن، ضایعات معدن به‌عنوان مواد باطله تولید و به محل دپو انتقال می‌یابد. دفع مناسب و نگهداری این مواد ازنظر زیست‌محیطی یک چالش بزرگ بوده و هزینه زیادی بر شرکت‌های تولیدکننده به همراه دارد. مطالعات متعددی در سراسر جهان برای به‌کارگیری این مواد در تولید مصالح ساختمان و استفاده از آن به‌عنوان سنگ‌دانه ریز یا جایگزینی بخشی از سیمان مصرفی انجام‌شده است. در این تحقیق مواد باطله معدن مس سونگون به‌عنوان جایگزین بخشی از سیمان مصرفی در بتن موردبررسی قرارگرفته است. آزمایش‌های مقاومت فشاری، کششی و مدول الاستیسیته بر روی نمونه‌های بتنی حاوی 0، 5، 10،15، 20، 25 و ۳۰ درصد مواد باطله انجام‌گرفته است. تصاویر میکروسکوپ الکترونی روبشی از خمیرسیمان حاوی این مواد تهیه و مورد مقایسه قرارگرفته است. نتایج آزمایش نمونه‌های 7، ۲۸، ۹۰ و ۳۶۵ روز نشان می‌‌دهد که به‌کارگیری این مواد به‌عنوان جایگزین سیمان می‌تواند منجر به بهبود خصوصیات مکانیکی بتن می‌گردد. تحلیل آماری داده‌ها حاکی از معنی‌دار بودن استفاده از این مواد است. بررسی اثرات زیست‌محیطی مخلوط تولیدشده حاکی از کاهش مخاطرات زیست‌محیطی است.}, keywords_fa = {مواد باطله معدن مس,خصوصیات مکانیکی. تحلیل آماری,اثرات زیست‌ محیطی}, url = {https://jcr.guilan.ac.ir/article_3580.html}, eprint = {https://jcr.guilan.ac.ir/article_3580_0f2312fe1401bb23bcb63f1fdd3d11cd.pdf} } @article { author = {sahraeimoghadam, amirhosein and Omidinasab, Fereydoon and dalvand, ahmad}, title = {Impact resistance of multi-layer slabs made with (HPSCC) reinforced by hybrid fibers under drop weight impact}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {73-87}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.9758.1272}, abstract = {In this research, the robust strength slabs made of concrete, self-compacting, multi-layer reinforced steel and nylon fibers and a combination them under the influence of impact load is investigated. To achieve this goal, 30 concrete slabs one layer and three layers with dimensions 40*40*7.5 cm are made. The slabs come from 10 different types, one type of non-fibrous as a control, and other slabs all have a fixed volume 1% fiber, hence the type and percentage of fiber varies in the layers. The impact weight loss test was performed on the made slabs. In this test, steel ball weighing 5.8 kg at a distance 1.5 m repeatedly hit and The number of blows to make the first crack and the destruction recorded. The results the test indicate a very high effect steel fibers and the slight impact nylon fibers on the slab resistance the slabs. Multi-layered slabs in the first-cracks are the same as the slabs a uniform laminate layer, but the resistance to the destruction and absorption the final energy these slabs increases compared to one-layer samples, which can be due to an increase in the percentage fiber in the outer layers and the layered layout the fibers.}, keywords = {multilayer slabs,steel fibers,nylon fibers,impact resistance,drop weight}, title_fa = {مقاومت ضربه ای دال های چندلایه ساخته شده با بتن توانمند خود تراکم الیافی هیبریدی تحت اثر ضربه وزنه افتان}, abstract_fa = {در این تحقیق مقاومت ضربه ای دال های چندلایه بتنی الیافی تحت اثر ضربه وزنه افتان بررسی شده است. تعداد 30 عدد دال بتنی یک لایه و سه لایه با ابعاد 75*400*400 میلی متر ساخته و آزمایش شد. دال ها از 10 مدل متفاوت می باشند، یک مدل بدون الیاف بعنوان نمونه شاهد و دیگر دال ها همگی دارای حجم ثابت 1 درصد الیاف در کل دال می باشند، در صورتی که نوع و درصد الیاف در لایه‌ ها متغیر است. بر روی دال های ساخته شده آزمایش ضربه وزنه افتان انجام شد. در این آزمایش گوی فولادی به وزن 5/8 کیلوگرم در فاصله ی 1/5 متری به صورت مکرر بر روی دال‌ ها ضربه زده و تعداد ضربه برای ایجاد اولین ترک و انهدام در دال ثبت شده است. نتایج آزمایش نشان دهنده تاثیر بسیار بالای الیاف فولادی و تاثیر ناچیز الیاف پلاستیکی بر روی مقاومت ضربه ای دل ها می باشد. دال های با چیدمان چندلایه در مقاومت اولین ترک عملکردی مشابه دال های یک لایه با الیاف یکنواخت دارند، اما مقاومت نهایی و جذب انرژی این دال ها نسبت به دال ‌های یک لایه افزایش می یابد، که علت آن می‌ تواند افزایش درصد الیاف در لایه های بیرونی و آرایش صفحه ای الیاف در لایه ها باشد.}, keywords_fa = {دال‌های چندلایه,الیاف فولادی,الیاف پلاستیکی,مقاومت ضربه‌ای,وزنه افتان}, url = {https://jcr.guilan.ac.ir/article_3277.html}, eprint = {https://jcr.guilan.ac.ir/article_3277_290537dd2502776bcac91dabafc3b070.pdf} } @article { author = {afkhami, hamide and malekinezhad, hossein and esmailzade, esmat}, title = {Design of concrete liners for surface protection of evaporation reducing physical covers}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {89-103}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.9136.1246}, abstract = {The use of evaporation reducing physical covers in open water reservoirs is one of the most important methods of water conservation. In the present study, three floating cover including Foamthalate, Urthalate and Unoconcrete were designed to protect the water resources of the Sarcheshmeh Copper Complex, which is based on two polystyrene and polyurethane materials. In order to protect the surface layers of the mentioned coatings against the climatic factors and acidic conditions of water was designed concrete liners in 18 concrete mixing designs and the water-to-cement ratio, the amount of Pozzolan replaces cement, Filler and polypropylene fibers was investigated as variable factors. Then the compressive strength of 28 and 42 days of the samples, as well as the corrosion rate within two months, were measured. In the following, the significance of the observed differences obtained from different experiments in samples made was investigated using Duncan's multiple range test. Finally, the results showed that the presence of Isfahan steel slag as a Pozzolan with 45% by weight of cement and the filler of WR780 at a rate of 2% led to get a maximum resistance of 42 days (560 N) and the lowest corrosion rate (4 g) in the L1 experiment. In addition, the results of the L10 and L15 experiments showed that the amount of Pozzolan replacing cement is a very important factor, so that amounts of more than 50% of it, significantly reduces the strength of the concrete and increases the amount of corrosion.}, keywords = {Water resources,evaporation control,anti-acid concrete,compressive strength,corrosion}, title_fa = {طراحی آستر بتنی به منظور حفاظت سطحی پوشش‌های فیزیکی کاهنده تبخیر}, abstract_fa = {استفاده از پوشش‌های فیزیکی کاهنده تبخیر در مخازن آبی روباز، یکی از مهم‌ترین روش‌های حفاظت از منابع آبی محسوب می‌گردد. در پژوهش حاضر سه پوشش شناور شامل فومتالات، یورتالات و یونوبتن به منظور حفاظت از منابع آبی مجتمع مس سرچشمه طراحی شده که اساس آن متشکل از دو ماده پلی‌استایرن و پلی‌یورتان می‌باشد. به منظور حفاظت لایه سحطی پوشش‌های نامبرده در مقابل عوامل اقلیمی و شرایط اسیدی آب، آستری بتنی طی 18 طرح اختلاط بتن طرح‌ریزی شد و در آن نسبت آب به سیمان، میزان پوزولان جایگزین سیمان، فیلر و الیاف پلی‌پروپیلن به عنوان فاکتورهای متغیر بررسی شد. سپس مقاومت 28 و 42 روزه نمونه‌ها و همچنین میزان خوردگی آن‌ها در بازه دو ماهه اندازه‌گیری گردید. در ادامه، معنی‌داری تفاوت‌های مشاهده شده حاصل از آزمایش‌های مختلف در نمونه‌های ساخته شده با استفاده از آزمون چند دامنه‌های دانکن بررسی شد. در نهایت نتایج بدست آمده نشان داد وجود سرباره فولاد اصفهان به عنوان پوزولان به-میزان 45 درصد وزنی سیمان و فیلر WR780 به‌میزان دو درصد در نمونهL1 منجر به کسب بیشترین مقاومت 42 روزه (560 نیوتن) و کمترین میزان خوردگی (4 گرم) شده است. همچنین این نمونه بیشترین افزایش مقاومت از 28 به 42 روز را در میان سایر نمونه‌ها داشته که حاکی از تکامل واکنش‌های سرباره در بازه بعد از 28 روز است. علاوه بر این نتایج آزمایش‌های L10 و L15 نشان داد، میزان پوزولان جایگزین سیمان فاکتور بسیار مهمی است، به‌طوری‌که مقادیر بیش از 50 درصد آن به شدت مقاومت بتن را کاهش و میزان خوردگی را افزایش می‌دهد.}, keywords_fa = {منابع آب,کنترل تبخیر,بتن ضد اسید,مقاومت فشاری,خوردگی}, url = {https://jcr.guilan.ac.ir/article_3582.html}, eprint = {https://jcr.guilan.ac.ir/article_3582_b2c07313d49f9c629c49d0c28f8e2d2d.pdf} } @article { author = {kaboosi, kami and Emami, Khashayar and Fadavi, Mehran}, title = {Interaction of treated industrial wastewater, zeolite and cement content on plain concrete at different curing ages}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {105-119}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.10983.1311}, abstract = {Global water scarcity and air pollution by greenhouse gases have amplified the need to use of unconventional water and environmental friendly materials in the concrete industry. Accordingly, the present study was conducted to investigate interaction of water quality, zeolite, cement content and curing age on concrete compressive strength. Regarding to the considerable types of the experimental treatments in this research and with respect to the lack of statistical analysis in previous studies, the concrete compressive strength data of this study were statistically analyzed by ANOVA and LSD tests based on a completely randomized design with factorial experiment with three replications. The results of analysis of variance test showed that the simple effect of the investigated factors, their two-way interactions, except water type*curing age and zeolite*curing age, and the three-way interaction of cement content*water type*zeolite on compressive strength of the concrete specimens were statistically significant. Due to the lack of significant negative effect of treated industrial wastewater and the mixture of equal tap water and treated industrial wastewater on the compressive strength of concrete, it is recommended to use these waters in the construction of plain concrete. However, the three-way interaction of water type with zeolite and cement content showed that the effect of investigated waters on compressive strength of concrete specimens in different percentage of zeolite is depended on cement content. So, the choice of the best application level of zeolite and water type according to the cement content should be selected based on the in- situ mix design test.}, keywords = {Analysis of variance,compressive strength,Concrete materials,Mix design,Unconventional water}, title_fa = {بررسی برهمکنش پساب صنعتی، زئولیت و عیار سیمان بر بتن غیرمسلح در سنین مختلف}, abstract_fa = {بحران‌های جهانی کمبود آب و آلودگی هوا به گازهای گلخانه‌ای لزوم استفاده از به ترتیب آب‌های نامتعارف و مصالح دوستدار محیط زیست در صنعت بتن را تشدید کرده است. بر این اساس، پژوهش حاضر با هدف بررسی برهمکنش کیفیت آب، زئولیت، عیار سیمان و سن عمل‌آوری بر مقاومت فشاری بتن صورت گرفت. با عنایت به تعداد زیاد تیمارهای آزمایش (120 تیمار) در این پژوهش و عدم تجزیه و تحلیل‌های آماری در پژوهش‌های قبلی، داده‌های مقاومت فشاری آزمونه‌های بتنی با استفاده از آزمون‌های تجزیه واریانس و مقایسه میانگین به صورت فاکتوریل در قالب طرح کاملاً تصادفی با سه تکرار مورد بررسی آماری قرار گرفت. نتایج آزمون تجزیه واریانس نشان داد که اثر ساده عوامل مورد بررسی و برهمکنش‌های دوگانه آنها، بجز نوع آب در سن آزمونه و زئولیت در سن آزمونه، و همچنین برهمکنش سه‌گانه عیار سیمان در نوع آب در زئولیت بر مقاومت فشاری آزمونه-های بتنی معنی‌دار بود. با عنایت به عدم مشاهده تاثیر منفی معنی‌دار پساب صنعتی و ترکیب آب شهری و پساب صنعتی بر مقاومت فشاری بتن، استفاده از آنها در ساخت بتن غیرمسلح توصیه می‌گردد. با این حال، وجود برهمکنش سه‌گانه معنی‌دار بین نوع آب با زئولیت و عیار سیمان نشان داد که اثر آب‌های مورد بررسی بر مقاومت فشاری آزمونه‌های بتنی در سطوح مختلف زئولیت به عیار سیمان بستگی دارد. بر این اساس، انتخاب بهترین سطح کاربرد زئولیت و نوع آب با توجه به عیار سیمان مورد نظر باید بر اساس آزمون طرح اختلاط در کارگاه به دست آید.}, keywords_fa = {آب نامتعارف,تجزیه واریانس,طرح اختلاط,مصالح بتن}, url = {https://jcr.guilan.ac.ir/article_3495.html}, eprint = {https://jcr.guilan.ac.ir/article_3495_9cfd695baca00b1a4340b16fdbe2736e.pdf} } @article { author = {Jalilifar, Hasan and Sajedi, Seyed Fathollah}, title = {Experimental study of some mechanical properties of recycled concrete containing micro-silica, fly ash and natural zeolite}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {121-136}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.11893.1323}, abstract = {The present study studies the effect of the replacement of different levels of recycled concrete aggregates on the mechanical behavior of recycled concrete. In made concretes, natural aggregates have been replaced at three levels of 25%, 50% and 100% with recycled concrete coarse aggregates. In order to enhance the mechanical performance of these concrete, each of the pozzolans including micro-silica, fly ash and natural zeolite has been replaced with cement at three different levels. A total of 360 cube and cylindrical concrete specimens were made in the form of 40 mixing designs, and tests of compressive strength, tensile strength, static modulus of elasticity and ultrasonic pulse velocity at 28 days of age were performed. The results showed that, without the use of pozzolanic materials, up to 25% replacement of recycled coarse aggregate, there was no significant change in the mechanical performance of this concrete, while the higher replacement rates resulted in a significant drop in the mechanical performance of this concrete. The use of micro-silica, especially at the replacement level of 10%, has led to a very good performance of recycled concrete even in the case of full replacement of recycled coarse aggregates. Other pozzolanic materials used were also relatively less and in lesser intervals of recyclable materials to improve their mechanical properties.}, keywords = {Recycled concrete,Mechanical properties,Micro-silica (SF),Fly ash (FA),Natural zeolite (NZ)}, title_fa = {مطالعه آزمایشگاهی برخی خواص مکانیکی بتن های بازیافتی حاوی میکروسیلیس، خاکستربادی و زئولیت طبیعی}, abstract_fa = {پژوهش حاضر به مطالعه تاثیر جایگزینی سطوح مختلف درشت‌دانه‌های بتنی بازیافت شده بر رفتار مکانیکی بتن-های بازیافتی پرداخته است. در بتن‌های ساخته شده سنگدانه‌های طبیعی در سه سطح %25، %50 و %100 با درشت‌دانه بتنی بازیافت شده جایگزین شده‌اند. جهت ارتقاء خواص مکانیکی این بتن‌ها، هر یک از پوزولان‌های میکروسیلیس، خاکستربادی و زئولیت طبیعی در سه سطح مختلف با سیمان جایگزین شده است. در مجموع 360 نمونه بتنی مکعبی و استوانه‌ای در قالب 40 نسبت مخلوط، ساخته شده و آزمایش‌های تعیین مقاومت‌ فشاری، مقاومت کششی دونیم‌شدن، تعیین ضریب ارتجاعی استاتیکی و تعیین سرعت انتشار امواج فراصوت در سن 28 روزه انجام گردید. نتایج نشان داد که بدون استفاده از مواد پوزولانی، تا سطح جایگزینی %25 از درشت‌دانه-های بازیافتی، مقاومت فشاری و کششی بدون تغییر باقی می‌مانند؛ در حالی که در جایگزینی کامل درشت‌دانه-ها، مقاومت فشاری تا %18 و مقاومت کششی تا %23 افت کردند. استفاده از میکروسیلیس به ویژه در سطح جایگزینی %10، منجر به عملکرد بسیار مناسب بتن‌های بازیافتی شد و باعث گردید تا مقاومت فشاری بتن تماماً بازیافتی %17 از مقاومت فشاری بتن معمولی بیش‌تر شود. دو ماده دیگر پوزولانی استفاده شده نیز هر یک به نسبت کم‌تر و در بازه‌های جایگزینی محدودتری از جایگزینی مصالح بازیافتی، در بهبود خواص مکانیکی این بتن‌ها موثر واقع شدند.}, keywords_fa = {بتن بازیافتی,خواص مکانیکی,میکروسیلیس,خاکستربادی,زئولیت طبیعی}, url = {https://jcr.guilan.ac.ir/article_3712.html}, eprint = {https://jcr.guilan.ac.ir/article_3712_8e3c0d723570972bbc7c4c5e2c343119.pdf} } @article { author = {Hosseini, Seyed Abbas}, title = {Probabilistic Calculation of the Corrosion Initiation of steel reinforcement Using Reliability Methods}, journal = {Concrete Research}, volume = {12}, number = {3}, pages = {137-145}, year = {2019}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2019.11702.1318}, abstract = {Reinforcement corrosion due to chloride ingress into the reinforced concrete (RC) structures adjacent to the sea and bridge in the snow-prone areas caused compromising the operation of these RC structures over time. Thereby in some of these structures, corrosion initiation is used for operational limit-state. There are so many methods for calculation of corrosion initiation time. There are many uncertainties in these models and because of that some errors made in calculated corrosion initiation time. In this paper using structural safety calculations and Monte Carlo sampling method (MC), the probability of corrosion initiation is calculated. As a new approach, corrosion initiation time is calculated based on the level of structural performances with the probability of 25,50 and 75 percent for the occurrence of corrosion initiation. Concrete quality, as well as the severity of environmental factors, were used as other basic parameters in this study. The uncertainty in the calculated time to corrosion initiation is also evaluated based on the statistical properties of the effective parameters in the model. Based on the results obtained, increasing the quality of concrete by reducing permeability has a greater effect on increasing the time for the first inspection of concrete structures}, keywords = {Corrosion initiation time,Reliability,Concrete durability,Chloride ingress,Probabilistic assessment}, title_fa = {محاسبه احتمالاتی آغاز خوردگی میلگرد با استفاده از روش‌های قابلیت اطمینان}, abstract_fa = {خوردگی میلگردها بر اثر نفوذ یون کلر در سازه‌های بتنی مجاور دریا و همچنین پل‌های مناطق برف‌خیز موجب به مخاطره افتادن این سازه‌ها در طی زمان بهره-برداری می‌گردد؛ بنابراین، در برخی از این سازه‌ها آغاز خوردگی به عنوان یکی از شرایط حدی بهره‌برداری منظور می‌گردد. روش‌های مختلفی برای محاسبه آغاز خوردگی وجود دارد که به دلیل وجود عدم قطعیت‌های فراوان در مدل‌های موجود، زمان محاسبه شده برای آغاز خوردگی با خطاهایی همراه می‌باشد. در این مقاله با استفاده از روش‌های محاسباتی مربوط به ایمنی و نمونه‌بردای مونت کارلو (MC) به ارزیابی احتمال آغاز خوردگی میلگرد در شرایط مختلف پرداخته شده است. به عنوان یک رویکرد جدید بر اساس سطوح عملکردی مختلف سازه، مقادیر احتمال آغاز خوردگی با احتمال رخداد 25، 50 و 75 درصد به منظور در نظر گرفتن درجه اهمیت سازه و همچنین ارائه برنامه‌های تعمیر و نگهداری سازه محاسبه گردیده است. کیفیت بتن و همچنین شدت عوامل محیطی به عنوان دیگر پارامترهای اساسی در این بررسی مورد استفاده قرار گرفته است. عدم قطعیت در زمان محاسبه شده برای آغاز خوردگی بر اساس خواص آماری پارامترهای موثر در مدل نیز مورد ارزیابی قرار گرفته است. بر اساس نتایج بدست آمده افزایش کیفیت بتن از طریف کاهش نفوذپذیری، تاثیر بیشتری در افزایش زمان تا اولین بازرسی از سازه بتنی دارد.}, keywords_fa = {زمان آغاز خوردگی میلگرد,قابلیت اطمینان,دوام بتن,نفوذ یون کلر,ارزیابی احتمالاتی}, url = {https://jcr.guilan.ac.ir/article_3713.html}, eprint = {https://jcr.guilan.ac.ir/article_3713_f4be2f9ecbabc9beafeeb58855d17fde.pdf} }