@article { author = {Naseri, H. and Afshin, H. and Tufani milani, A.}, title = {Investigation into Mechanical Properties of Fibers Reinforced Lightweight Concrete Precast Panels}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {7-15}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = { Lightweight Concrete is one of the most important materials in the construction of concrete structures. The main disadvantages of lightweight concrete are their low compressive, flexural and tensile strength. To solve this problem, fibers can be used to reinforce concrete. Fibers reinforced lightweight concrete can be used as an excellent building material in the construction of structural /nonstructural elements. In this study the mechanical properties of fibers reinforced lightweight concrete precast panels and their suitability for use in manufacturing precast building elements have been studied experimentally. The results show that fiber reinforced lightweight concrete has sufficient compressive and flexural strength and also suitable ductility and it can be used for construction of precast structural/nonstructural elements.  }, keywords = {Lightweight Concrete,fiber reinforced concrete,Mechanical properties,precast panels}, title_fa = {بررسی مشخصات مکانیکی پانل های پیش ساخته تولید شده با بتن سبک دانه الیافی}, abstract_fa = {بتن سبک یکی از عمده­ترین مصالح مورد استفاده در ساخت سازه­های بتنی  می­باشد. از معایب اصلی بتن سبک، می­توان به مقامت فشاری،  خمشی و کششی کم آن اشاره کرد. یکی از روش­های غلبه بر این مشکل مسلح نمودن بتن به الیاف مناسب می­باشد. بتن سبک‌دانه الیافی می­تواند به‌عنوان یکی از مناسب­ترین مصالح در ساخت عناصر سازه­ای و غیرسازه­ای  کاربرد داشته باشد. در این تحقیق مشخصات مکانیکی پانل­های پیش ساخته بتن سبک­دانه الیافی مورد بررسی آزمایشگاهی قرار گرفته و مناسب بودن این پانل­ها برای کاربرد در ساخت عناصر ساختمانی به‌صورت پیش ساخته مورد بررسی قرار گرفته است. نتایج تحقیق نشان می­دهند که این نوع بتن سبک­دانه الیافی دارای مقاومت فشاری، خمشی و شکل­پذیری کافی بوده و پانل­های پیش ساخته تهیه شده از آن نیز دارای مقاومت برشی، خمشی و شکل­پذیری کافی می­باشند لذا  می­توانند برای ساخت اجزای ساختمانی به‌کار روند.}, keywords_fa = {بتن سبک,بتن الیافی,مشخصات مکانیکی,پانل های پیش ساخته}, url = {https://jcr.guilan.ac.ir/article_1307.html}, eprint = {https://jcr.guilan.ac.ir/article_1307_127a0b94edd1ab4a50c1068e930325e7.pdf} } @article { author = {Arabzade, Abolfazl and Noori Soola, Amin}, title = {Investigating Effective Parameters in Shear Strength of Deep Beams without Shear Reinforcement}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {17-30}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {Investigating non-linear behavior of structures in order to evaluating vulnerability and determining performance level of existing structures is very important. Because of deep beams dimensions and also cost and time limitation and complexity of applying boundary conditions in lab, it is better to use software and non-linear analysis. In this paper the behavior of deep beams with lightweight and normal concrete and shear length to height ratio of 0.5, 1, 1.5 and 2 and also height of 30, 45, 60 and 90 centimeters is studied using Abaqus software. Results of non-linear analysis show that normalized shear strength decreases with increase in height in both groups of beams and this decrease can be seen in all shear length to height ratios. Comparing experimental results with truss methods available in codes shows that all methods are conservative in small height beams and safety margin reduces with increase in height. Results are non-conservative in CSA method in shear length to height ratio of 0.5 and in normal concrete, and with increase in shear length to height, predicted shear strength by CSA method is much more than strength obtained from analysis.}, keywords = {Deep beam,Finite element analysis,reinforced concrete,Truss method,shear strength,Abaqus}, title_fa = {بررسی پارامترهای مؤثر در مقاومت برشی تیرهای عمیق بتنی بدون آرماتور برشی}, abstract_fa = {بررسی رفتار غیر خطی سازه‌ها به منظور ارزیابی آسیب‌پذیری و تعیین سطح عملکرد سازه‌های موجود از اهمیت بالایی برخوردار است. به دلیل ابعاد تیرهای عمیق و همچنین محدودیت هزینه و زمان و پیچیدگی اعمال شرایط مرزی در آزمایشگاه بهتر است از نرم‌افزار و تحلیل غیرخطی استفاده شود. در این مقاله رفتار تیرهای عمیق با بتن سبک و معمولی و با نسبت دهانه برشی به ارتفاع 5/0، 1، 5/1 و 2 و همچنین ارتفاع 30، 45، 60 و 90 سانتی‌متر با استفاده از نرم‌افزار Abaqus مطالعه و بررسی شده است. نتایج حاصل از تحلیل غیر خطی نشان می‌دهد که مقاومت برشی نرمالیزه شده در هر دو گروه از تیرها با افزایش ارتفاع کاهش می‌یابد و این کاهش در تمام نسبت‌های دهانه برشی به ارتفاع دیده می‌شود. مقایسه نتایج حاصل از آزمایش با روش‌های تحلیل خرپایی موجود در آیین‌نامه‌ها نشان می‌دهد که تمام روش‌ها در تیرهای با ارتفاع کم محافظه‌کارانه بوده و با افزایش ارتفاع از حاشیه ایمنی کاسته می‌شود. در روش آیین‌نامه CSA در نسبت دهانه برشی به ارتفاع 5/0 و دربتن معمولی جواب‌ها غیر محافظه کارانه می‌باشد و با افزایش نسبت دهانه برشی به ارتفاع مقاومت برشی پیش‌بینی شده توسط روش CSA خیلی بیشتر از مقاومت به‌دست آمده حاصل از تحلیل می‌باشد.}, keywords_fa = {تیر عمیق,تحلیل المان محدود,بتن مسلح,بتن سبک,روش خرپایی,مقاومت برشی}, url = {https://jcr.guilan.ac.ir/article_1308.html}, eprint = {https://jcr.guilan.ac.ir/article_1308_cfe376cffb970701dbd61ab5c2fcfd1b.pdf} } @article { author = {Bagheri, A. and Farrokhi, F. and Mahdikhani, M. and Farokhzad, R. and Baghdadi, J.}, title = {Representing Appropriate Aggregates Grading Zone for Self-consolidating Concrete by Using Soil Classifying Parameters}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {31-46}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {Today, we see frequent use of self-consolidating concrete (SCC) because of its special fresh and hardened properties in civil projects. These properties are depend on numerous parameters such as paste content and composition and aggregates volume and its grading. Hence, aggregates as an inexpensive material, can play an important role in concrete production. Since an increase in aggregates properties results in reduction of cement paste which is used to fill up the voids, therefore this paper proposes a method to approach a proper aggregates gradingzone with lesser voids content by using uniformity coefficient and coefficient of gradation in soil mechanics. From the results, it can be seen that there is a direct and inverse correlation between uniformity coefficient, coefficient of gradation and void content, respectively. The presented grading zone shows that all the concluding aggregate proportions satisfy all fresh and hardened properties andwill lead to produceSCC.}, keywords = {Packing density,Aggregates grading,Uniformity coefficient,Coefficient of gradation,Self-consolidating concrete}, title_fa = {ارائۀ محدودۀ دانه‌بندی مناسب برای ساخت بتن خودتراکم‌ با استفاده از پارامترهای طبقه‌‌بندی خاک}, abstract_fa = {امروزه از بتن خودتراکم به دلیل دارا بودن خواص تازه و سخت شده مناسب، به صورت انبوه در پروژه‌های عمرانی استفاده می‌شود. این خصوصیات به پارامترهای متعددی از قبیل ترکیب و میزان خمیر سیمانی، میزان حجم سنگدانه، دانه‌بندی سنگدانه و عوامل دیگر وابسته می‌باشد. در این بین سنگدانه‌ها می‌توانند در تأمین خواص مورد نیاز بتن خودتراکم تأثیر قابل توجهی داشته باشند. از آنجا که افزایش مقدار مصالح سنگی در بتن سبب کاهش میزان خمیر سیمان مصرفی جهت پرکردن فضای خالی سنگدانه‌ها می‌شود، لذا در این مقاله هدف، دستیابی به محدوده دانه‌بندی مناسب با کمترین فضای خالی با استفاده از روابط کاربردی ضریب یکنواختی و ضریب انحناء در مکانیک خاک می‌باشد. نتایج نشان می‌دهد که رابطه مستقیم و معکوسی بین به ترتیب ضریب انحناء و ضریب یکنواختی با میزان فضای خالی در مصالح سنگی وجود دارد.همچنین محدودهدانه‌بندی به دست آمده برای ساخت بتن خودتراکم شامل دانه‌بندی‌هایی است که تمامی ضوابط پذیرش خصوصیات تازه و سخت شده بتن خودتراکم را ارضاء می‌کند.  }, keywords_fa = {تراکم انباشتگی,دانه‌بندی,ضریب یکنواختی,ضریب انحنا,بتن خود متراکم}, url = {https://jcr.guilan.ac.ir/article_1309.html}, eprint = {https://jcr.guilan.ac.ir/article_1309_99f397890e7df91a3978826fc3ed996c.pdf} } @article { author = {Mohammadkazemi, Faranak and Doosthoseini, Kazem and Ganjian, Eshmaiel and Azin, Mehrdad}, title = {Effects of Bacterial Nanocellulose on Properties of Fiber-Cement Composites and Durability to Freeze-Thaw Cycling}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {47-56}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {In this study, the effect of bacterial nanocellulose, in three levels (control, powder and gel) as a reinforcement for fiber- cement composites was investigated. Also, 6 and 7 wt% of bagasse fibers were used for composite manufacturing. Mechanical and physical properties of composites including modulus of rupture (MOR), modulus of elasticity (MOE), fracture toughness (FT), internal bonding strength (IB), and ware absorption (WA) after 2 and 24h emersion in water were measured. Results showed that composites made with cellulose gel had higher bending strengths, internal bonding strength and fracture toughness. Combination of 7% bagasse fiber content and cellulose gel reduced water absorption of composites. In these composites, internal bonding was increased and less empty spaces remained for water penetration probably due to uniform distribution of fibers and cellulose gel within the cement matrix. XRD analysis showed that peaks corresponding to main hydration products such as CSH and calcium hydroxide had higher intensities in composites containing bacterial cellulose gel. Results obtained from freeze-thaw cycling test showed that composites containing cellulose gel had the higher internal bonding strength compared with other two composites after 20 cycles. In this study, fiber-cement composites produced from 7% bagasse fiber and bacterial cellulose gel have been selected as the optimum treatment. }, keywords = {fiber- cement composites,bacterial nanocellulose,Mechanical properties,water absorption,XRD,freeze- thaw cycling}, title_fa = {اثر نانوسلولز باکتریایی بر خواص کامپوزیت های فیبر- سیمان و دوام در برابر چرخه ذوب-انجماد}, abstract_fa = {در این تحقیق، اثر نانوسلولز باکتریایی در سه سطح (شاهد، پودر و ژل) بعنوان تقویت­کننده کامپوزیت­های فیبر- سیمان بررسی شده است. همچنین الیاف باگاس با مقادیر 6 و 7 درصد برای ساخت کامپوزیت­ها استفاده شد. خواص مکانیکی و فیزیکی کامپوزیت ها شامل مدول گسیختگی (MOR)، مدول الاستسیته (MOE)، چقرمگی شکست (FT)، مقاومت چسبندگی داخلی (IB) و جذب آب (WA) پس از 2 و 24 ساعت غوطه وری در آب اندازه گیری شد. نتایج نشان داد که کامپوزیت­های ساخته شده با ژل سلولز، مقاومت­های خمشی، مقاومت چسبندگی داخلی و چقرمگی شکست بالاتری داشتند. ترکیب 7 درصد الیاف باگاس و ژل سلولز در کامپوزیت­ها جذب آب را کاهش داد. در این کامپوزیت­ها احتمالاً به دلیل توزیع یکنواخت الیاف و ژل سلولز داخل ماتریکس سیمان اتصالات داخلی افزایش یافته و فضاهای خالی کمتری برای نفوذ آب باقی مانده است. آنالیز پراش اشعه ایکس (XRD) نمونه­ها نشان داد که در کامپوزیت­های حاوی ژل سلولز باکتریایی شدت پیک­های مربوط به فراورده­های هیدراتاسیون عمده از جمله ژل کلسیم سیلیکات هیدراته و هیدروکسید کلسیم بیشتر بود. نتایج به‌دست آمده از آزمون چرخه ذوب- انجماد نشان داد که کامپوزیت­های حاوی ژل سلولز مقاومت چسبندگی داخلی بالاتری بعد از 20 چرخه در مقایسه با دو کامپوزیت دیگر داشتند. در این بررسی، کامپوزیت­های فیبر- سیمان ساخته شده از 7 درصد الیاف باگاس و ژل سلولز باکتریایی بعنوان تیمار بهینه انتخاب شدند.  }, keywords_fa = {کامپوزیت های فیبر- سیمان,نانوسلولز باکتریایی,خواص مکانیکی,جذب آب,آنالیز اشعه ایکس (XRD),چرخه ذوب- انجماد}, url = {https://jcr.guilan.ac.ir/article_1310.html}, eprint = {https://jcr.guilan.ac.ir/article_1310_ce216a912960191618579545662758c9.pdf} } @article { author = {Ahmadi, M. and Hassani, A. and Soleymani, M.}, title = {Role of Recycled Steel Fibers from Tires on Concrete Containing Recycled Aggregate from Building Waste}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {57-68}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {With limited material resources and fragile environment, the need to recycle materials is inevitable. Waste from construction and demolition has good potential for recycling. These materials are usually abandoned or buried in the ground without being efficiently used. Retrieve them, while solving environmental problems will also be conservation for limited natural resources. Construction waste can be separated after crushing, screening, and grading and then can be used as aggregate in concrete construction. In the recycling industry, what will be remained after recycling old tires are rubber powder and steel wires. Therefore, the use of steel wire in the concrete in addition to solving environmental problems, improve the mechanical properties of concrete too.In this study the role of recycled steel fibers in concrete containing recycled aggregates have been investigated.Rates of replacement of this type of aggregate with coarse natural aggregate are: 0%, 50% and 100%. The amount of fibers used in the mix design is 0.5%of concrete volume. The results showed that the addition of steel fibers in concrete with recycled aggregate, low resistance can be recovered.}, keywords = {construction waste,concrete,recycled steel fiber}, title_fa = {نقش الیاف فلزی بازیافتی از لاستیک خودرو بر بتن حاوی سنگ‌دانه‌های بازیافتی ناشی از نخاله‌های ساختمانی}, abstract_fa = {محدود بودن منابع و حفظ محیط زیست، لزوم بازیافت مواد و مصالح را اجتناب ناپذیر کرده است.نخاله­های حاصل از ساخت­وساز و تخریب پتانسیل مناسبی برای بازیافت دارند. این مواد معمولاً بدون استفاده در زمین رها شده و یا دفن می­شوند لذا،  بازیافت آن‌ها ضمن حل مشکلات زیست محیطی باعث حفظ منابع طبیعی محدود نیز می­گردد.  نخاله­های ساختمانی را می­توان پس از تفکیک و خرد کردن، سرند کرده و  به‌عنوان سنگدانه در ساخت بتن استفاده کرد. همچنین در صنعت بازیافت ، آنچه پس از بازیافت لاستیک­های فرسوده بجا می­ماند پودر لاستیک و سیم‌های فلزی است. لذا، استفاده از این سیم­های فلزی در بتن علاوه بر رفع مشکل زیست محیطی،  باعث بهبود خصوصیات مکانیکی بتن نیزمی­گردد.در این تحقیق به بررسی نقش الیاف فلزی بازیافتی در بتن حاوی سنگ‌دانه­های بازیافتی پرداخته شده است. درصد جایگزینی این نوع سنگدانه­ها با درشت­دانه­های طبیعی به میزان %0 ، % 50 و % 100  و میزان الیاف به‌کار رفته در طرح اختلاط­ها % 5/0  حجم بتن  می­باشد. نتایج  نشان داد که با افزودن الیاف فلزی  بازیافتی به بتن با سنگدانه­های بازیافتی،کمبود مقاومت  این نوع بتن­ها جبران می گردد.}, keywords_fa = {نخاله های ساختمانی,بتن,الیاف فلزی بازیافتی}, url = {https://jcr.guilan.ac.ir/article_1311.html}, eprint = {https://jcr.guilan.ac.ir/article_1311_2cda446f8c5b8940dee9f1c791948711.pdf} } @article { author = {Moradi Shaghaghi, Taleb and Alaghipour, Hasan and Shahedifar, Masoud}, title = {Experimental Investigation of Strength of Concrete with Verbascum Thapsus (Mahur) Herbal Additive}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {69-79}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {Due to the high usage of concrete in construction, civil engineers try to decrease the defects of concrete and increase the benefits of it by using some methods. One of these methods is adding additive materials in order to achieve mentioned target. Undoubtedly in the usage of these materials engineers should pay attention to economic issues, decreasing costs of project and their availability. Most of these additive materials used in concrete, are chemicals and albeit they improve some properties of concrete they have some negative effects on other features of it. In this investigation an herbal additive material is used in concrete, this herbal material is the powder of the leaves of a plant named Mahur or Khargushak)Verbascum Thapsus) that grows in the mountains naturally. The experimental results of specimens in this investigation indicate that adding this herbal material during concrete mixing increases compressive strength up to 12% and tensile strength 20% to 25%. Due to the significant increase in tensile strength of concrete by adding the powder of Mahur additive, the surficial cracks of concrete decrease. By the way the amount of used cement in order to reach to a specific strength decreases.  }, keywords = {Verbascum Thapsus(Mahur),Compressive Strength of concreter,Tensile Strength of concreter,Water per Cement ratio}, title_fa = {بررسی آزمایشگاهی مقاومت بتن حاوی ماده افزودنی گیاهی ماهور}, abstract_fa = {با توجه به مصرف بسیار بالای بتن در کارهای ساختمانی، مهندسان عمران همیشه سعی می کنند با بکار بردن روش‌ها و موادی نقایص و معایب این ماده پر مصرف را کاهش داده و مزایای آن را افزایش دهند. یکی از این روش‌ها استفاده از مواد افزودنی جهت نیل به اهداف فوق است. مسلما در استفاده از این مواد، مسائل اقتصادی و کم کردن هزینه‌ها و در دسترس بودن آن‌ها نیز مورد توجه مهندسین می باشد. اغلب مواد افزودنی که در ساخت بتن مورد استفاده قرار می‌گیرند، مواد شیمیایی بوده و ضمن بهبود بعضی خصوصیات بتن باعث اثر سو در بعضی ویژه گی‌های دیگر بتن می شود. در این تحقیق یک نوع ماده افزودنی گیاهی در بتن مورد استفاده قرار می گیرد، این ماده افزودنی پودر حاصل از برگ‌های گیاه ماهور یا خرگوشک (در زبان محلی سیرگویروغی یا دوشان قولاغی) نام دارد، که در کوهستان‌ها بصورت وحشی به وفور رشد می کند. نتایج آزمایشات انجام شده روی نمونه های آزمایشگاهی در این تحقیق نشان می دهند با افزودن مقدار پودر گیاه خشک شده ماهور در حین اختلاط بتن به آن، مقاومت فشاری نمونه‌ها حدود  12 درصد و مقاومت کششی نمونه‌ها به مقدار حدود 20 الی 25 درصد افزایش می یابد.  با توجه به افزایش قابل توجه در مقاومت کششی بتن به علت افزودن پودر ماهور، مقدار ترک‌های سطح بتن نیز کاهش می‌یابند. ضمنا مقدار سیمان مصرفی برای رسیدن به مقاومت مشخص نیز کاهش می‌یابد.}, keywords_fa = {گیاه ماهور- مقاومت فشاری بتن - مقاومت کششی بتن - نسبت آب به سیمان}, url = {https://jcr.guilan.ac.ir/article_1312.html}, eprint = {https://jcr.guilan.ac.ir/article_1312_62fa16365d0ac4fc60231aa0c05c349c.pdf} } @article { author = {Khorram, Negin and Kazem Sharbatdar, Mohammad}, title = {Flexural Strength Study The Deficient RC Slabs Strengthened with HPFRC Different Layers}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {81-91}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {Many reinforced concrete buildings in the world  and Iran, have a life of over several decades And many reasons have been damaged. According to the Replacing these buildings will lead to high costs and is no economic and Environmental feasibility and Due to the need Increasing engineers and construction industry Professionals to strengthen, repair and rehabilitation of concrete structures, Several different methods have been proposed for this issue. One method of  strengthening is the approach of using a special concrete With high capabilities. one of these concretes is HPFRCC. Experimental  Studies have been carried lately about strengthening with HPFRCC on beams, Columns,slabs and other Structural elements and the strength of this concrete Has been confirmed in  strengthening. High performance fiber reinforced cement composite (HPFRCC) is a material that is composed of a cement-based matrix and short composite and steel fibers.that Indicate multiple cracking under tensile stress  and  because of  high bonding strength, HPFRCC used as a repair material. However, the mechanical performance of a RC member repaired with HPFRCC has yet been investigated sufficiently. In this paper, is used layers of  HPFRCC  (HPFR CC patching )in different  thickness  for deficient  RC  slabs  Flexural  Strengthened  and numerical Study HPFRCC  layers on this slabs with  Finite Element.}, keywords = {strengthening- cnocrete slabs- HPFRCC layers- Flexural strength}, title_fa = {بررسی تقویت خمشی دال‌های ضعیف بتنی با لایه‌های متفاوت کامپوزیت‌های الیافی توانمند(HPFRCC)}, abstract_fa = {امروزهبسیاریازساختمانهایبتنآرمهدرایرانوجهان،عمریبیشازچنددههدارندوبهدلایلزیادیآسیبدیده‌اند. باتوجهبهآنکه جایگزینکردناینساختمانهاهزینههایفراوانیبهدنبالداشتهوتوجیهاقتصادیوزیستمحیطیندارد و به علت نیاز روز افزون مهندسین و متخصصین صنعت ساختمان به تقویت، ترمیم و به‌سازی سازه های بتنی روشهای مختلف و متعددی برای این موضوع مطرح گشته است. یکی از روش های مقاوم سازی می تواندرویکرداستفادهازبتنهای ویژهباتوانمندیوعملکردبالاباشد که از انواع این بتن ها می توان به HPFRCC اشاره کرد. اخیرامطالعاتآزمایشگاهیدرموردمقاوم‌سازیبا HPFRCC رویتیرها، ستون ها، دال ها وسایر المان های سازه ای صورتگرفتهوقدرتاین بتندرمقاومسازیتأییدشدهاست. ترکیب کامپوزیت مسلح شده با الیاف با عملکرد بالا (HPFRCC ) ماده ای است با ترکیبی از خمیره ی سیمان و الیاف تقویتی کوتاه که تحت تنش کششی ترک های متعددی در آن ایجاد می شود و به علت مقاومت پیوستگی بالا از آن به عنوان ماده ی تعمیر استفاده شده است. با این حال عملکرد مکانیکی عضو RC تعمیر شده با HPFRCC هنوز به میزان کافی مورد بررسی قرار نگرفته است. در این مقاله از لایه های HPFRCC در ضخامت ها ی مختلف  با بهره گیری از تکنیک وصله برای تقویت خمشی دال‌های ضعیف بتنی استفاده گردیده و با استفاده از روش المان محدود به بررسی عددی اثر مقاومتی لایه های  HPFRCC بر این دال‌ها پرداخته شده است. نتایج حاکی از آن است که تقویت خمشی دال‌ها با HPFRCC سبب بهبود عملکرد مکانیکی و همچنین بهبود شکل پذیری دال‌ها می شود.}, keywords_fa = {مقاوم سازی,دال‌های بتنی,لایه‌های HPFRCC,تقویت خمشی}, url = {https://jcr.guilan.ac.ir/article_1313.html}, eprint = {https://jcr.guilan.ac.ir/article_1313_1823f7283f0050a135d39cc968a0dd7e.pdf} } @article { author = {Maghsoudi, A.A. and Akbarzadeh Bengar, H. and Masoudnezhad, Mehrdad}, title = {A Proposal of The Most Appropriate Concrete to Construct High-Rise Buildings (Case Study: A 21-Story Project in Babolsar)}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {93-108}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {In order to select the most suitable concrete for the construction of high-rise buildings, method of analytic hierarchy process (AHP) based on expert knowledge has been used. Investigating alternative contain designing structure, costs, quality, time and easy to do. In order to closer examination and get documented results, six types of concrete (with or without vibration) for a 21-storey building in the city of Babolsar is running with normal concrete is studied. Structures with the software ETABS modeling was investigated. These structures, based on listed criteria, the Analytical Hierarchy Process and Expert Choice software was evaluated. The results suggest that By using low weight concrete, and self compact low weight concrete, weight of the building reduced to %12.5 in comparison to normal, and self compact concrete and to 4.9% in comparison to high strength, and self compact high strength concrete. By using high strength, and self compact high strength concrete, the cost of consumed bar is reduced to 18.9% in comparison to normal, and self compact concrete and to 7.8% in comparison to low weight concrete. According to all criteria evaluated in this study, High strength self compacting concrete is primarily importance to construction high-rise is located.}, keywords = {high-rise buildings high-rise buildings,concrete with and without vibration,Multi-Criteria-Decision-Making,AHP}, title_fa = {پیشنهاد بتن مناسب در ساخت ساختمان های بلند مرتبه (بررسی موردی پروژه 21 طبقه در بابلسر)}, abstract_fa = {در این مطالعه به‌منظور انتخاب مناسب ترین بتن برای ساخت ساختمان های بلند مرتبه، روش فرایند تحلیل سلسله مراتبی (AHP) که مبتنی بر دانش کارشناسی بوده، مورد استفاده قرار گرفته است. معیار‌های مورد بررسی در این پژوهش شامل طراحی سازه‌ای، هزینه، کیفیت، زمان و سهولت اجرا می باشد. به منظور بررسی دقیق تر و به‌دست آوردن نتایج مستندتر، شش نوع بتن (با و بدون نیاز به ویبره) برای سازه 21 طبقه که در شهرستان بابلسر با بتن معمولی در حال اجرا می‌باشد مورد بررسی قرار گرفته است. سازه با نرم افزار ETABS مدل سازی و بررسی گردید. این سازه ها، براساس معیار‌های ذکر شده، با روش تحلیل سلسله مراتبی و استفاده از نرم افزار Expert Choiceمورد بررسی و ارزیابی قرار گرفتند. نتایج به‌دست آمده حاکی از آن است که استفاده از بتن سبک و سبک خودتراکم موجب کاهش وزن سازه به میزان 5/12درصد نسبت به بتن معمولی و خودتراکم و 9/4 درصد نسبت به بتن مقاومت بالا و مقاومت بالای خودتراکم خواهد شد. بتن مقاومت بالا و بتن مقاومت بالای خود متراکم، مصرف میلگرد را به میزان 9/18 درصد نسبت به بتن معمولی و بتن خودتراکم و همچنین 8/7 درصد نسبت به بتن سبک و بتن سبک خودتراکم کاهش خواهد دهد. با توجه به تمامی معیار‌های مورد بررسی در این پژوهش بتن خودتراکم مقاومت بالا در درجه اول اهمیت برای ساخت سازه‌های بلند مرتبه قرار گرفته است و همچنین با توجه به هر معیار، بتن‌ها اولویت بندی شده و نتایج گزارش شده است.}, keywords_fa = {سازه‌های بلند مرتبه,بتن با و بدون نیاز به ویبره,تصمیم‌گیری چند معیاره,تحلیل سلسله مراتبی}, url = {https://jcr.guilan.ac.ir/article_1314.html}, eprint = {https://jcr.guilan.ac.ir/article_1314_573e2429200fdce38ebf64adf3994113.pdf} } @article { author = {Reisi, Mohammad and Emadi, Hamed}, title = {Effect of Silica Fume (SF) and Air Entraining Agent (Aea) on Homogeneity, Compressive Strength and Cost of EPS Concrete}, journal = {Concrete Research}, volume = {7}, number = {2}, pages = {109-120}, year = {2015}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {EPS concrete is a type of lightweight concrete that can be produced by replacing the normal aggregate with expanded polystyrene (EPS), either partially or fully, depending upon the requirements of density. Expanded polystyrene (EPS) concrete is good energy-absorbing material and is used in building as partition blocks and floor leveling. However, due to the light weight of EPS beads and their hydrophobic surface, EPS concrete is prone to segregation during casting, which results in poor workability, homogeneity and lower strength. The present study was designed to investigate the effects of mix design parameters such as percentage of EPS instead of aggregate, silica fume (SF), air entraining agent (AEA) on compressive strength and homogeneity. In this research, 16 concrete mix designs with W/CM equal to 0.4 and density about 770 kg/m3 were made. The results of this research show that using silica fume and air entraining agent can decrease segregation of EPS grains and improve bonding between EPS and cement paste, so the concrete mixture will have more homogeneity and compressive strength. In this research, production cost of mix designs was calculated. Economical investigation show that although using SF and AEA in EPS concrete increases cost of concrete up to maximum %20, it increases compressive strength even up to %262.}, keywords = {Lightweight Concrete,EPS,silica fume,Air entraining agent,Homogeneity Compressive strength, Cost}, title_fa = {بررسی تاثیر دوده‌سیلیس و مادۀ هوازا بر همگنی، مقاومت فشاری و قیمت تمام شدۀ بتن سبک EPS}, abstract_fa = {بتن EPS یکی از انواع بتن سبک می‌باشد که در آن ذرات پلی استایرن منبسط شده (EPS) بسته به چگالی بتن، جایگزین بخشی یا تمامی سنگدانه‌ها می‌شوند. این نوع بتن ماده‌ای با جذب انرژی خوب می‌باشد و در ساختمان می‌توان از آن جهت شیب‌بندی طبقات و از بلوک ساخته شده با آن جهت ساخت دیوار غیر بار بر (پارتیشن) استفاده نمود. به دلیل اینکه ذرات EPS بسیار ریز می‌باشند و در ضمن آب گریز هستند، لذا در بتن EPS، ذرات EPS تمایل به جدا شدگی دارند و بتن ساخته شده از همگنی و روانی مناسب برخوردار نمی‌باشد و دارای مقاومت فشاری کم می‌باشد. در تحقیق حاضر با ساخت 16 طرح اختلاط مختلف، تاثیر استفاده از دوده‌سیلیس و مادۀ هوازا در بتن EPS، بر مقاومت فشاری و ظاهر آن از نظر همگنی مورد بررسی قرار گرفته است. نسبت آب به مواد سیمانی (W/CM) کلیه‌ی طرح‌های اختلاط بر روی 4/0 و چگالی کلیه‌ی طرح‌های اختلاط بر روی kg/m3 770 تنظیم شده است. نتایج بدست آمده نشان می‌دهد که استفاده‌ی همزمان از دوده‌سیلیس و مادۀ هوازا در بتن EPS می‌تواند ضمن بهبود وضعیت ظاهری بتن، باعث افزایش مقاومت فشاری بتن شود. در این تحقیق علاوه بر آزمایشات فوق، قیمت تمام شده‌ برای ساخت یک متر مکعب بتن از هر یک از طرح‌های اختلاط محاسبه ‌شده است نتایج بررسی اقتصادی نشان می‌دهد که اگر چه با استفاده از دوده‌سیلیس و مادۀ هوازا در بتن EPS، قیمت تمام شده حداکثر 20% افزایش می‌یابد اما می‌توان با این روش مقاومت فشاری را حتی تا 262% افزایش داد.}, keywords_fa = {بتن سبک,پلی استایرن,دوده سیلیس,مادۀ هوازا,همگنی,مقاومت فشاری,قیمت}, url = {https://jcr.guilan.ac.ir/article_1315.html}, eprint = {https://jcr.guilan.ac.ir/article_1315_9c2f3eff43a37199f7978ddd06e080a7.pdf} }