@article { author = {Hashemi, Seyed Jafar and رزاقی لنگرودی, جواد and سروقدمقدم, عبدالرضا}, title = {Effect of Concrete Sandwich Infill Panels with Opening on In-plane Behaviour of Steel Frames}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {5-18}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2563}, abstract = {With the advent and expansion of new technologies in recent years, masonry infill walls are gradually being replaced by other materials such as sandwich composite panels. Ignoring the effect of concrete sandwich panel (CSP) as infill on the behaviour of framed buildings in the analysis and design process, especially in seismic regions, is not always on the safe side. In the present study, the effect of presence of CSP, as infill, with opening on the in-plane behaviour of steel frames is numerically investigated by using finite element modelling. First, the proposed model is validated with existing experimental data. Next, a parametric study is conducted to evaluate the influence of effective factors e.g. size, type (window and door) and location of the openings (eccentric and central). The results show that the presence of openings within an infill panel modifies the lateral behaviour of the infilled frame by changing the distribution of stresses and formation of compression diagonal struts and leads to considerable change in the lateral stiffness and strength of the infilled frames.}, keywords = {In-plane behaviour,Concrete sandwich panel,Nonlinear finite element,Numerical modelling}, title_fa = {اثر میانقاب ساندویچی بتنی دارای بازشو بر رفتار درون صفحه ای قابهای فولادی}, abstract_fa = {در سالهای اخیر با گسترش فناوری های نوین در صنعت ساختمان، پانل های ساندویچی بتنی به تدریج جایگزین میان قاب های بنایی در ساختمان ها شده است. نادیده گرفتن اثر پانل های مذکور به عنوان میان قاب در رفتار ساختمان ها در فرآیند تحلیل و طراحی سازه، به خصوص در مناطق لرزه خیز، در جهت اطمینان نخواهد بود. در مطالعه ی حاضر، با مدل سازی عددی به روش اجزای محدود غیرخطی، اثر وجود میان قاب های ساندویچی بتنی دارای بازشو بر رفتار درون صفحه ی قاب های فولادی بررسی می شود. برای این منظور ابتدا مدل پیشنهادی با استفاده از نتایج آزمایشگاهی موجود، اعتبارسنجی شده و سپس با انجام مطالعه ی پارامتری اثر عواملی نظیر ابعاد بازشو و موقعیت آن و نیز نوع بازشو، درب یا پنجره، مورد ارزیابی قرار می گیرد. نتایج نشان می دهد وجود بازشو در پانل میان قاب با تغییر در نحوه ی توزیع تنش و تشکیل دستک‌های قطری فشاری در سطح پانل، رفتار جانبی قاب را تحت تأثیر قرار داده و منجر به تغییر قابل ملاحظه در سختی و مقاومت جانبی قاب های میان پر می شود.}, keywords_fa = {رفتار درون صفحه,پانل ساندویچی بتنی,اجزای محدود غیرخطی,مدل‌سازی عددی}, url = {https://jcr.guilan.ac.ir/article_2563.html}, eprint = {https://jcr.guilan.ac.ir/article_2563_26bf70ccede9d68f1732bbf234568a5f.pdf} } @article { author = {Khanzadi, Mostafa and Tadayon, Mohsen and maleki, mohamad saeid and Zahabi, Sajad and Tadayon, Mohamad Hossein}, title = {Measuring the Electrical Resistivity of concrete by Bulk, Surface, Galvapulse and the Electrical Conductivity methods}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {19-28}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2558}, abstract = {The deterioration of reinforced concrete structures is one of the most important issues that the cost of repair or replacement will cause great economic losses. One of the main reasons for these detriments is corrosion of embedded steel reinforcement in concrete. Field measurement of electrical resistivity of concrete is mainly used as an indicator of corrosion activity. Electrical resistivity is an important component of the Corrosion cell. Most resistance causes less corrosion current to flow between the anode and cathode regions. As a result, the electrical resistivity plays an important role in controlling the corrosion rate of steel reinforcement. In this article various methods of measuring the electrical resistivity of concrete such as Bulk, surface (wenner), Galva pulse and electrical conductivity (ASTM C1760) methods are compared with each other. Two normal concrete mix with water to cement ratio of 4.0 and the 375 and 425 kg of cement per cubic meter and 3 scc mixes with water cement ratio of 4.0 include VMA materials, stone powder and simple scc mix was built and planned tests at ages 7, 28 and 90 days on which they were made. The results indicate a strong correlation between different methods of measurement.}, keywords = {Electrical Resistivity,electrical conductivity,corrosion}, title_fa = {اندازه گیری مقاومت ویژه الکتریکی بتن با روش های حجمی، سطحی، گالواپالس و هدایت الکتریکی}, abstract_fa = {فرسودگی سازه‌های بتن مسلح یکی از مسایل بسیار مهم است که هزینه تعمیر یا جایگزینی آن‌ها باعث به وجود آمدن خسارات اقتصادی بسیار زیادی می‌شود. یکی از دلایل عمده این آسیب‌دیدگی‌ها، خوردگی آرماتورهای فولادی مدفون در بتن است. اندازه‌گیری میدانی مقاومت الکتریکی بتن، اساساً به‌عنوان شاخصی از فعالیت خوردگی آرماتورها استفاده می‌شود. مقاومت الکتریکی جزء مهمی از سلول خوردگی است. مقاومت بیشتر، باعث عبور جریان خوردگی کمتر بین نواحی آندی و کاتدی فولاد است. درنتیجه، مقاومت الکتریکی نقش مهمی را در کنترل نرخ خوردگی فولاد مسلح کننده بازی می‌کند. در این تحقیق روش‌های مختلف اندازه‌گیری مقاومت ویژه الکتریکی بتن ازجمله روش حجمی، سطحی (ونر)، گالواپالس و روش استاندارد هدایت الکتریکی ASTM C1760 با یکدیگر مقایسه می‌گردند. بدین منظور دو مخلوط بتن معمولی با نسبت آب به سیمان 4/0 و مقدار مواد سیمانی 375 و 425 کیلوگرم در مترمکعب و 3 مخلوط بتن خودتراکم با نسبت آب به سیمان 4/0 شامل طرح حاوی مواد لزجت زا، طرح حاوی پودر سنگ و طرح فاقد افزودنی ساخته شد و آزمایش‌های برنامه‌ریزی‌شده در سنین 7 و 28 و 90 روز بر روی آن‌ها انجام شد. نتایج نشان‌دهنده وجود ارتباط قوی میان روش‌های مختلف اندازه‌گیری است.}, keywords_fa = {مقاومت ویژه الکتریکی,هدایت الکتریکی,خوردگی}, url = {https://jcr.guilan.ac.ir/article_2558.html}, eprint = {https://jcr.guilan.ac.ir/article_2558_0c85b3a9bdc19d22e7e5aaea701e18f4.pdf} } @article { author = {Golmohammadi, Mohammad and ghalehnovi, mansur}, title = {Investigation on the interlayer shear behavior on steel-concrete-steel sandwich structure with high strength stud bolt connectors}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {29-43}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2556}, abstract = {Steel-concrete-steel sandwich panels are composed of two thin steel face plates and a thick concrete layer as core. To provide external steel faces connection to concrete layer is used types of shear connectors. This paper is focused on the interlayer shear behavior of the SCS sandwiches with high strength stud bolt shear connectors. In order to investigate the effect of the geometric parameters on the shear behavior, push-out test under progressive loading is conducted. Variable Geometric parameters are included in thickness of the concrete core, steel plates thickness and diameter of the stud bolt. For this purpose, exprimental samples prepared and investigated According to achieved results, the assessment of the ductility, failure modes, and ultimate shear strength is performed. Moreover, two relations are proposed for shear strength and load-slip behavior of stud bolt shear connectors. These formulas are compared with those of the earlier researches on the Bi-steel shear connectors.}, keywords = {Steel-concrete-steel sandwich panels,shear connector,high strength stud bolt,push-out test,load-slip behavior}, title_fa = {بررسی رفتار برشی بین‌لایه‌ای سازه ساندویچی فولاد-بتن-فولاد با اتصال‌دهنده‌های پیچ‌میله با مقاومت‌بالا}, abstract_fa = {پانل‌های ساندویچی فولاد-بتن-فولاد (SCS) از دو رویه خارجی کم‌ضخامت با مقاومت و وزن مخصوص بالا از جنس فولاد و یک لایه ضخیم با مقاومت و وزن مخصوص کم بین دو ‌رویه به نام هسته از جنس بتن، تشکیل شده است. اتصال رویه‌های خارجی به هسته بتنی توسط اتصال‌دهنده‌های برشی تامین می‌‌گردد. پیچ‌میله‌ با مقاومت‌بالا یکی از انواع اتصال‌دهنده‌های برشی می‌‌باشد که رفتار برشی بین‌لایه‌ای آنها در مقاله حاضر مورد مطالعه قرار گرفته است. برای بررسی تأثیر تغییر مشخصات هندسی بر رفتار برشی سازه‌های ساندویچی فولاد-بتن-فولاد با اتصال‌دهنده‌های پیچ‌میله با مقاومت‌بالا، آزمایش فشارخارج تحت اثر بارگذاری تدریجی انجام شده است. برای این منظور نمونه‌های آزمایشگاهی با تغییر در پارامترهای هندسی شامل ضخامت هسته بتنی، ضخامت رویه‌های فولادی و قطر پیچ‌میله‌ها ساخته شده و به ارزیابی و مقایسه میزان شکل‌پذیری، مودهای خرابی و مقاومت برشی نهایی نمونه‌ها پرداخته شده است. سپس براساس آزمایش‌های انجام شده روابطی جهت پیش‌بینی مقاومت برشی نهایی و رفتار بار-لغزش نمونه‌های با اتصال‌دهنده‌های برشی پیچ‌میله پیشنهاد گردیده است.}, keywords_fa = {پانل ساندویچی فولاد-بتن-فولاد,اتصال‌دهنده برشی,پیچ‌میله با مقاومت بالا,آزمایش فشارخارج,رفتار بار-لغزش}, url = {https://jcr.guilan.ac.ir/article_2556.html}, eprint = {https://jcr.guilan.ac.ir/article_2556_29a9e449340f71c6abed52710b74554c.pdf} } @article { author = {بهرامی, عطااله and کاظمی, فاطمه and سیدپور, سیدعلی and موتاب, مهدی}, title = {Heavyweight concrete produced with Barite aggregates of W-Azerbaijan mines}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {45-51}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2560}, abstract = {Heavyweight concrete has a special place in the construction of reactors in nuclear power plants, medical centers, accelerators research centers and military centers as protective panels. Purpose of this research, is design and manufacture of heavyweight concrete with using of barite reserves of W-Azerbaijan province. Therefore, after conducting preliminary studies on several samples of barite ore, barite ore from Shakh-Sefid mine (in Mahabad County) has been appropriated, according to ASTM C637 and ASTMC33 standards for the production of heavyweight concrete. The concrete mix designed with doing several test, and was prepared concrete with different percent of barite and heavyweight concrete made of 100% barite. In all cases the amount of cement and W/C ratio fixed, respectively is 350 (kg/m3) and 0.48. Different experimental such as physical, mechanical and nuclear doing upon the sample. The results showed that heavyweight concrete is made by combining 100% Barite (instead of sand) has a density about 3.362 (gr/cm3), compressive strength 386.73 (kg/cm2), tensile strength 54.8 (kg/cm2), modulus of elasticity 2.63×105 (kg/cm2), the ultrasonic wave velocity 4.80 (km/s) and attenuation coefficients for radiation sources of cobalt-60 and cesium-137, respectively is 0.22 cm-1 and 0.30 cm-1.}, keywords = {Barite aggregate,heavyweight concrete,physical & mechanical properties,radioactive,W-Azerbaijan}, title_fa = {تولید بتن‌سنگین از سنگدانه‌های باریت معادن استان آذربایجان‌غربی}, abstract_fa = {کاربرد بتن‌های سنگین در ساخت راکتورهای نیروگاه‌های هسته‌ای، مراکز پزشکی، مراکز تحقیقاتی شتاب‌دهنده‌ها و نیز مراکز نظامی به‌عنوان پانل‌های محافظ، جایگاه خاصی را داراست. هدف از این تحقیق، طراحی و ساخت بتن سنگین با استفاده از ذخایر باریت استان آذربایجان-غربی است. بدین منظور پس از انجام مطالعات اولیه بر روی چندین نمونه سنگ باریت، نمونه باریت معدن شاخ‌سفید مهاباد براساس استانداردهای ASTM C637 و ASTMC33 (با توجه به مقادیر چگالی و عیار) برای ساخت بتن سنگین انتخاب گردید. سپس طرح اختلاط بتن با انجام 4 آزمایش تعیین، و نمونه‌هایی از بتن سنگین با 0، 50، 65، 75، 85 درصد سنگدانه باریت و همچنین بتن سنگین ساخته شده از 100 درصد سنگدانه باریت، تهیه گردید. در تمامی نمونه‌ها مقدار سیمان و نسبت آب به سیمان ثابت و به‌ترتیب برابر350 کیلوگرم بر مترمکعب و 48/0 است. بر روی نمونه‌ها آزمایش‌های تعیین مقدار چگالی، مقاومت فشاری، مقاومت کششی، مدول الاستیسیته، سرعت امواج التراسونیک و آزمایش‌های محافظت پرتویی انجام شد. نتایج حاصل از آزمایش‌ها نشان داد که بتن سنگین ساخته شده با ترکیب 100% باریت (به‌جای سنگدانه شن و ماسه) دارای چگالی 362/3 گرم بر سانتیمترمکعب، مقاومت فشاری 73/386 کیلوگرم بر سانتیمترمربع، مقاومت کششی 8/54 کیلوگرم بر سانتیمترمربع ، مدول الاستیسیته 105×63/2 کیلوگرم بر سانتیمترمربع، سرعت امواج اولتراسونیک در آن 80/4 کیلومتر بر ثانیه و ضریب تضعیف برای تابش چشمه‌های کبالت-60 و سزیم-137 به‌ترتیب cm-1 22/0 و cm-1 30/0 است.}, keywords_fa = {سنگدانه باریت,بتن سنگین,آزمایش‌های فیزیکی و مکانیکی,محافظت پرتویی,آذربایجانغربی}, url = {https://jcr.guilan.ac.ir/article_2560.html}, eprint = {https://jcr.guilan.ac.ir/article_2560_2e35353f821b59ee2fc76b00c8172caa.pdf} } @article { author = {khaghani boroujeni, amir and Madani, Hesam and Mansoori, Hakimeh}, title = {The Influence of Zinc Oxide nanoparticels on the microstructural properties of cement mortars and the performance on the removal of a type of algae}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {53-66}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2557}, abstract = {In recent years, several researches have been carried out to investigate the applications of nano science in the concrete technology. It appears that by combination of nano science and concrete technology, new scientific horizons could be opened and high quality construction and building materials may be produced. . As a matter of fact, some types of nano materials have photocatalytic characteristics and could disintegrate the pollutants and various types of organic substances. Hence, utilizing nano technology, multi-purpose materials with enhanced characteristics and new applications such as self- cleaning surfaces could be produced. Several types of nano materials have photocatalytic characteristics, which among them nano ZnO and TiO2 have found higher attention. The influence of TiO2 on the cement based materials has been the subject of several researches. However, nano ZnO was not considered appreciably. Thus, in the present study, the performance of different percentages of Nano ZnO on the mechanical and microstructural properties of concrete has been investigated. The studied properties were setting times, compressive strength, hydration degree, reaction with calcium hydroxide and microstructural analysis by scanning electron microscopy images (SEM). Moreover, with regards to the photocatalytical properties of this material, the influence of nano ZnO on the removal of a type of algae was scrutinized. The results indicate that nano-ZnO could significantly increase the initial and final setting times, leading to the slow formation of microstructure at very early ages.Furthermore, the photocatalytic investigation showed that the mortar surfaces containing these nanoparticles could prevent the growth of the blue-green algae.}, keywords = {nano zinc oxide,cement based materials,durability and mechanical properties,algae}, title_fa = {بررسی اثرات نانو ذرات اکسیدروی بر مشخصات ریزساختاری مواد پایه سیمانی و عملکرد این سطوح در حذف گونه‌ای از جلبک‌ها}, abstract_fa = {همگام با توسعه فناوری نانو در رشته های مختلف، در چندین سال اخیر محققان به بررسی خواص و کاربرد های این فناوری در تکنولوژی بتن پرداخته اند، چرا که همواره کنترل مواد در مقیاس نانو نوید دهنده تحولات شگرفی در زمینه های مختلف علوم بوده که به سبب خواص ویژه ذرات در این فاز، طرفداران بسیاری در بین محققان علم مواد و تکنولوژی بتن پیدا نموده است. در این مقاله عملکرد درصدهای مختلف نانو ذرات اکسیدروی بر مشخصات مکانیکی و ریزساختاری مواد پایه سیمانی موردبررسی و ارزیابی قرارگرفته است. همچنین با توجه به گسترش آلودگی‌ها ناشی از رشد بی‌رویه جلبک‌ها اثرات این سطوح در حذف این میکروارگانیسم بررسی شد. در این مطالعه آزمایش‌های گیرش، مقاومت فشاری، هیدراسیون، واکنش با هیدروکسیدکلسیم و تصویر میکروسکوپ الکترونی روبشی (SEM) انجام شد. نتایج آزمایش‌ها نشان می‌دهد نانو اکسیدروی سبب کاهش سرعت‌گیرش می‌گردد درنتیجه تشکیل آرام ریزساختار در این سطوح سبب بهبود مشخصات مکانیکی و دوام می‌گردد. همچنین عامل دیگری که سبب بهبود مشخصات مهندسی این سطوح می‌گردد واکنش‌پذیری مناسب این نانوذره با هیدروکسید کلسیم در مقایسه با دوده سیلیسی و سرباره مس است. بررسی آزمایش‌های فوتوکاتالیستی نیز نشان می‌دهد سطوح حاوی این نانو ذرات قادرند به‌طورکلی مانع از رشد و نمو گونه جلبک سبز-آبی موردبررسی در این مطالعه شوند.}, keywords_fa = {نانواکسیدروی,مواد پایه سیمانی,مشخصات مکانیکی و دوام,جلبک}, url = {https://jcr.guilan.ac.ir/article_2557.html}, eprint = {https://jcr.guilan.ac.ir/article_2557_1e6599fd341135614ee5a8f6954d2a18.pdf} } @article { author = {tarighat, amir and moazzenchi, sanaz}, title = {Laboratory evaluation of geopolymerization reaction in bricks production}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {67-80}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2561}, abstract = {Recently, Energy and environmental factors play important roles in economy and politics of different countries due to increasing complexity and evolution of international community. Therefore introducing and designing new materials which reduce manufacturing cost, decreasing energy consumption and being environmental-friendly are crucial. This paper studies the feasibility of utilizing laterite soil for production of eco-friendly bricks based on the geopolymerization technology. The procedure for producing this kind of brick simply includes: mixing laterite soil with an alkaline solution, water, sand or without sand and forming the bricks by compressing the mixture in a mold under a specified pressure. Final step is curing the bricks at a slightly elevated temperature. Unlike the conventional method for producing bricks, the new procedure does not require high temperature kiln firing hence it has significant environmental benefits. In this study, effects of five major factors including types of alkaline solution, addition condensed silicafume to mixture, curing temperature, amount of laterite soil and age of bricks were investigated. The results for compressive strength, water absorption and ultrasonic test value were analyzed by statistical method. Findings show that laterite soil available in northwest of Iran can be used to produce eco- friendly bricks based on geopolymerization technology to meet the Iran standard and ASTM requirements for engineering bricks.}, keywords = {Geopolymeric bricks,Laterite soil,Environment}, title_fa = {ارزیابی آزمایشگاهی استفاده از واکنش ژئوپلیمریزاسیون در تولید آجر}, abstract_fa = {- در سال های اخیر به دلیل پیچیدگی و تحولات روز افزون جامعه جهانی، عامل انرژی و محیط زیست نقش اساسی در اقتصاد و سیاست هر ملت ایفا می کند. به همین دلیل شناخت و تولید مصالحی که باعث کاهش هزینه های ساخت و همچنین کاهش مصرف انرژی و کمک به محیط زیست گردند بسیار مورد توجه می باشد. این مقاله امکان استفاده از خاک لتریت معادن ایران را برای تولید آجرهای سازگار با محیط زیست بر پایه‏ی تکنولوژی ژئوپلیمریزاسیون مورد مطالعه قرار می‏دهد. روش تولید این نوع آجر، اختلاط خاک لتریت با محلول قلیایی، ماسه یا بدون آن و آب و تحت فشار قرار دادن آن در قالب و عمل آوری در گرمخانه می باشد. در این روش بر خلاف روش سنتی نیاز به حرارت بالای کوره نیست که این مساله منافع زیست محیطی قابل توجهی به دنبال دارد. در این مطالعه تاثیر پنج عامل موثر نوع محلول قلیایی، افزودن میکروسیلیس به مخلوط، دمای عمل آوری، مقدار لتریت و سن نمونه روی مشخصات آجر بررسی شده و با استفاده از آزمایش‏های مقاومت فشاری، جذب آب و التراسونیک نتایج مورد تحلیل قرار گرفت. نتایج نشان داده است که خاک لتریت موجود در شمال غرب ایران می تواند برای تولید آجرهای سازگار با محیط زیست بر پایه‏ ی تکنولوژی ژئوپلیمریزاسیون براساس استاندارد شماره 7 ملی ایران و استاندارد ASTM-C67–03a استفاده شود.}, keywords_fa = {آجر ژئوپلیمری,خاک لتریت,محیط زیست}, url = {https://jcr.guilan.ac.ir/article_2561.html}, eprint = {https://jcr.guilan.ac.ir/article_2561_bc000d169454d281593fc4e34c4b5b06.pdf} } @article { author = {بهشتی نژاد, حسین and Miri, Mahmoud and قاسمی, محمد رضا}, title = {Experimental Investigation on Corrosion Parameters of Reinforced Concrete Beams Containing Nano Wollastonite}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {81-94}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2562}, abstract = {Periodic evaluation of the corrosion parameters is one of the methods usually used to assess the defects, resulting in increasing the service life of reinforced concrete (RC) structures in aggressive environments. In this paper the performance of NC and NCW beams in aggressive environment were compared. Ten RC beams (100×150×1500 mm) including 5 normal (NC) and 5 nano wollastonite concrete (NCW) samples were prepared and tested. All beams were monitored under simultaneous loading and accelerated corrosion. Evaluation of corrosion was conducted with measurement of half-cell potential difference (HCP), electrical resistance and rebar mass loss. The results showed that the terms of potential difference and electrical resistance were improved in NCW beams compared to NC beams. Potential difference in NC beams was 20% more negative than NCW beams at slight corrosion levels. Also, the average amount of electrical resistance of NCW beams was 2.1 times as that of NC beams. Another finding of this study was a 35% difference between the rebar mass loss of NCW samples compared with the NC samples at low corrosion levels. In general, NCW beams showed superior performance compared to their NC counterparts in terms of corrosion cracking, half-cell potential values, Electrical resistance, and rebar mass loss. As a result, the use of nano wollastonite, as a green admixture, can increase the service life of RC structures.}, keywords = {RC beam,corrosion,Half-cell potential difference,Electrical resistance,Nano wollastonite}, title_fa = {بررسی آزمایشگاهی پارامترهای ناشی از خوردگی در تیرهای بتنی حاوی نانوولاستونیت}, abstract_fa = {یکی از راه‌های تشخیص خرابی و در نتیجه افزایش عمر مفید سازه‌های بتن مسلح در محیط‌های مخرب، سنجش پارامترهای ناشی از خوردگی به صورت دوره‌ای است. در این تحقیق تعداد 10 عدد تیر بتنی مسلح به ابعاد 100×150×1500 میلی‌متر در دو گروه: بتن معمولی (NC) و بتن حاوی نانو‌ولاستونیت (NCW) جهت ارزیابی در برابر خوردگی ساخته و در معرض هم‌زمان اعمال بار و خوردگی تسریع شده قرار گرفتند. ارزیابی خوردگی با استفاده از اندازه‌گیری اختلاف پتانسیل نیم‌پیل، مقاومت الکتریکی و کاهش جرم میلگرد صورت پذیرفت. نتایج نشان می‌دهد اختلاف پتانسیل و مقاومت الکتریکی در نمونه‌های NCW نسبت به نمونه‌های NC بهبود یافته‌ به‌گونه‌ای که مقدار اختلاف پتانسیل در درجات کم خوردگی در نمونه‌های NC، 20% نسبت به نمونه‌های NCW منفی‌تر است. همچنین مقدار مقاومت الکتریکی تیرهای NCW به طور میانگین حدود 1/2 برابر نمونه‌های NC می‌باشد. از دیگر نتایج این تحقیق، اختلاف 35% کاهش جرم در نمونه‌های NCW نسبت به نمونه‌های NC در درجات کم خوردگی‌‌ می‌باشد. بهبود این نتایج نشان‌دهنده افزایش عمر بهره‌برداری در سازه‌های بتن مسلح حاوی نانو‌ولاستونیت است.}, keywords_fa = {تیر بتن مسلح,خوردگی,اختلاف پتانسیل نیم‌پیل,مقاومت الکتریکی,نانو ولاستونیت}, url = {https://jcr.guilan.ac.ir/article_2562.html}, eprint = {https://jcr.guilan.ac.ir/article_2562_90ff58e481ff6534f0d1e326ae3baf8e.pdf} } @article { author = {hazarmalian, norvan and Talaeitaba, behzad}, title = {Experimental and Numerical Study on an Innovative Method for Strengthening Concrete Columns using Surface Steel Rebar and FRP Jacket.}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {95-111}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2554}, abstract = {In this study, an Innovative a method called EBRGS is developed for strengthening RC columns. In this method Grooves are initially cut out along the lengths of the concrete specimens into which longitudinal reinforcement is planted ( as like as NSM method for attaching FRP rods in longitudinal slits) . And then FRP stirrups were used to enhance specimen’s confinement and specimen's load capacity . 16 cylindrical concrete specimens, with the measurement of 150 mm in diameter and 300 mm in height are manufactured, all specimens tested under static axial loading. It is found that the proposed EBRGS technique is capable of enhancing both the compressive strength and the ductility of the RC column specimens; steel rebars inside the grooves on the surface leads to an enhancement of 23% in compressive strength while the application of FRP stirrups along with surface rebar enhance both ductility and compressive strength by 41% relative the control specimen.}, keywords = {strengthening of columns,grooving method,Confinement,increasing compressive capacity}, title_fa = {مطالعه‌ی آزمایشگاهی و عددی یک روش نوین ترکیبی در مقاوم‌سازی ستون‌های بتن آرمه با استفاده از آرماتورهای فولادی سطحی و دورپیچ‌های ناپیوسته‌ی FRP}, abstract_fa = {در تحقیق حاضر روش جدید پیشنهادی ترکیبی با نام EBRGS، برای مقاوم‌سازی ستون‌های بتن‌آرمه پیشنهاد می‌گردد و مورد بررسی قرار می‌گیرد. در این روش ابتدا شیار‌های طولی بر روی سطح بتن ایجاد می‌شود سپس آرماتور طولی درون شیارها چسبانده می‌شود، ( مانند روش نصب NSM برای چسباندن میلگردهای FRP داخل شیار های طولی ) در آخر از نوارهای حلقوی FRP برای ایجاد محصور‌شدگی و افزایش شکل‌پذیری بر روی نمونه‌ها استفاده می‌گردد. در این پژوهش از 16 نمونه‌ی کوچک مقیاس استاندارد استفاده گردید، تمام نمونه‌ها تحت بارگذاری محوری استاتیکی مورد آزمایش قرار گرفتند. نتایج آزمایشات نشان داد که روش پیشنهادی (EBRGS) هم باعث افزایش ظرفیت فشاری و هم باعث افزایش شکل‌پذیری می‌گردد؛ چسباندن میلگرد داخل شیارهای سطحی روی بتن باعث افزایش ظرفیت فشاری به اندازه‌ی 23% و استفاده هم‌زمان از الیاف کامپوزیت و آرماتور‌های سطحی به عنوان محصور‌کننده باعث افزایش شکل‌پذیری و ظرفیت فشاری به اندازه‌ی 41% نسبت به نمونه‌ی کنترل می‌شود.}, keywords_fa = {مقاوم‌سازی ستون‌ها,روش شیارزنی,محصور‌شدگی,افزایش ظرفیت فشاری}, url = {https://jcr.guilan.ac.ir/article_2554.html}, eprint = {https://jcr.guilan.ac.ir/article_2554_c5cc7c109e48d7a3bc0a9c8daad6ad96.pdf} } @article { author = {Rostami Galehdar, Majid and bahrami chegeni, iman}, title = {Investigation of effective parameters in preparation of pervious concrete}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {113-123}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {10.22124/jcr.2017.2555}, abstract = {In most developed countries, pervious and permeable concrete pavements are regularly used in sidewalks, parks or low-volume roads such bicycle lanes and car parks, and are considered an excellent alternative to hard impervious traditional pavements. Increasing global popularity of pervious concrete pavements is because of their economic, environmental and technical advantages primarily achieved by their ability to allow water to easily pass through. In this paper, we aimed to produce a pervious concrete that would satisfy porosity and permeability requirements, while providing better load bearing, compressive strength and workability. To achieve this objective, aggregates of different materials with different physical and chemical properties and gradations were mixed with different proportions of admixtures and cement to produce a variety of pervious concretes with different strengths. Produced concretes were sampled and samples were put to slump, compressive strength, porosity and permeability tests. After evaluation and analysis of obtained results, the best mix design that would conform to regulations and would also satisfy the strength and economic factors was introduced.}, keywords = {pervious concrete,permeability,aggregate,compressive strength,porosity}, title_fa = {بررسی پارامترهای مؤثر در تولید بتن متخلخل}, abstract_fa = {امروزه در اکثر جوامع پیشرفته دنیا به‌منظور اجرای رویه‌ها در پیادهروها، پارکها و یا مکانهای محل تردد و رفت‌وآمد با بار ترافیکی سبک، همانند خطوط ویژه عبور دوچرخه‌ها و یا پارکینگ خودروهای سبک، از ترکیبات بتنی متخلخل و نفوذپذیر به عنوان یک جایگزین مناسب به‌جای روسازی‌های سخت و غیرقابل نفوذ در گذشته استفاده می‌گردد، بنابراین استفاده از بتن متخلخل در ساخت رویه‌ها چه از لحاظ کنترل سیلاب، توجیه اقتصادی و یا سازگاری با محیط زیست بیشتر از گذشته مورد توجه قرار گرفته است. در این مقاله، هدف تولید نوعی از بتن متخلخل است که علاوه بر معیارهای نفوذپذیری و تخلخل بالا، به لحاظ تحمل بارهای وارده، مقاومت فشاری بیشتر و نیز روانی بالاتری از خود نشان دهد. در این راستا چند نمونه سنگ‌دانه با مشخصه‌های فیزیکی، شیمیایی و دانه‌بندی‌های متفاوت با درصدهای مختلف مواد افزودنی و سیمان با طرح اختلاط معین و با نسبتهای مشخص مخلوط می‌شوند و انواعی از بتنهای متخلخل با مقاومتهای گوناگون در سنین مختلف تولید شد. پس از انجام آزمایشهای اسلامپ، مقاومت فشاری، درجه تخلخل و نفوذپذیری روی نمونه‌های مختلف و بررسی و تفسیر نمودارها و تحلیل نتایج، مناسب‌ترین طرح اختلاط به لحاظ انطباق بر استانداردها و ارضای فاکتورهای مقاومتی و اقتصادی معرفی گردید.}, keywords_fa = {بتن متخلخل,سنگدانه,نفوذپذیری,تخلخل,مقاومت فشاری}, url = {https://jcr.guilan.ac.ir/article_2555.html}, eprint = {https://jcr.guilan.ac.ir/article_2555_fe7e652bb3f199241fe174fc3549eab8.pdf} } @article { author = {عفتی, میثم and ghasemzade mosavi nejad, seyed hosein and فلاحتکار گشتی, محسن}, title = {Prediction of the Concrete Slump with Artificial Neural Network Model and the Multivariable Linear Regression Method}, journal = {Concrete Research}, volume = {10}, number = {3}, pages = {125-136}, year = {2017}, publisher = {University of Guilan}, issn = {2008-4242}, eissn = {}, doi = {}, abstract = {Workability is the important property of a fresh concrete. There are many methods to measure the workability of concrete. One of the most common and frequently used method is the slump test. In order to achieve the concrete with a desired workability, different concrete mixtures must be made and the slump test be done. To save time, money and material, the prediction methods are used to predict the slump on the basis of the results obtain from a certain number of concrete mixtures. In this study, Multivariable Linear Regression (MLR) method and the Artificial Neural Network (ANN) model, as one of soft computation algorithms, are utilized to evaluate slump prediction and the results in terms of applicability, accuracy and efficiency are compared. The proposed ANN model is the multilayer perceptron with back-propagation learning algorithm. The results showed that the predicted values of both methods are desirable and acceptable. The correlation coefficient, mean square error and the mean absolute error in the ANN model are respectively 0/9853, 0/485 and 0/547. These values in the multivariable linear regression method are respectively 0/8717, 1/7731 and 0/9136. In the multivariable linear regression method, a linear relationship between independent and dependent variables is determined. But, in the most cases and reality, this relationship is not extremely linear, so the predicted values in this method may have big errors and can be neglected. The ANN model, predicts the output by learning the true relationship between inputs and output parameters.}, keywords = {Concrete Slump,Soft Computing,Artificial Neural Network (ANN),Multivariable Linear Regression (MLR)}, title_fa = {پیش‌بینی اسلامپ بتن با استفاده از مدل شبکه عصبی مصنوعی و روش رگرسیون چندمتغیره خطی}, abstract_fa = {روش‌های مختلفی جهت اندازه‌گیری کارایی بتن وجود دارد که یکی از متداول‌ترین و معمول‌ترین روش‌ها، آزمایش اسلامپ است. جهت دست‌یابی به مخلوط‌های بتنی با اسلامپ مورد نظر، باید مخلوط‌های مختلف بتنی ساخته شود و آزمایش اسلامپ بر روی آن‌ها صورت گیرد. جهت صرفه‌جویی در زمان، هزینه و مصالح بهتر است از روش‌های هوشمندی جهت پیش‌بینی اسلامپ بتن بر اساس نتایج مربوط به تعداد معینی از مخلوط‌های بتنی استفاده شود. در پژوهش حاضر روش رگرسیون چندمتغیره خطی (MLR) و مدل شبکه عصبی مصنوعی (ANN) به عنوان یکی از الگوریتم‌های محاسبات نرم جهت پیش‌بینی اسلامپ بتن مورد ارزیابی قرار گرفته و نتایج از لحاظ کاربردی بودن، دقت و کارایی مقایسه می‌شوند. مدل شبکه عصبی مورد استفاده در این مقاله از نوع پرسپترون چند لایه پیشخور با الگوریتم یادگیری پس‌انتشار است. نتایج نشان می‌دهد که مقادیر پیش‌بینی شده اسلامپ بتن توسط هر دو مدل مطلوب و قابل‌قبول می‌باشند. ضریب همبستگی، میانگین مربعات خطا و میانگین خطای مطلق در روش شبکه عصبی مصنوعی به ترتیب برابر با 9853/0 ، 485/0 و 547/0 تعیین گردید، که این مقادیر در روش رگرسیون چندمتغیره خطی به ترتیب برابر با 8681/0 ، 9696/1 و 0077/1می‌باشند. نتایج تحقیق نشان می‌دهد که در پیش‌بینی اسلامپ بتن به روش شبکه عصبی مصنوعی، مدل با یادگیری رابطه واقعی بین متغیرها اقدام به پیش بینی متغیر خروجی می‌نماید. لذا این مدل نسبت به روش رگرسیون چندمتغیره خطی دارای دقت بیش‌تری در پیش‌بینی اسلامپ بتن می‌باشد.}, keywords_fa = {پیش‌بینی اسلامپ بتن,محاسبات نرم,شبکه عصبی مصنوعی(ANN),رگرسیون چندمتغیره خطی (MLR)}, url = {https://jcr.guilan.ac.ir/article_2559.html}, eprint = {https://jcr.guilan.ac.ir/article_2559_9e13d883353b0bb0c86ffc9dd24e8c4f.pdf} }